A method to design dual-band, high-directivity ebg resonator antennas using single-resonant, single-layer partially reflective surfaces

被引：31

作者：

Ge Y. ^{[1
]}

Esselle K.P. ^{[1
]}

Bird T.S. ^{[2
]}

机构：

[1] Centre for Microwave and Wireless Applications, Electronic Engineering, Macquarie University, Sydney

[2] CSIRO ICT Centre, Epping, NSW 1710

来源：

Progress In Electromagnetics Research C | 2010年 / 13卷

关键词：

D O I：

10.2528/PIERC10020901

中图分类号：

学科分类号：

摘要：

A new method is presented to design dual-band, high- directivity, EBG-resonator antennas using simple, single-resonant, single-layer partially reflective surfaces (PRS). The large, positive gradient of the reflection phase versus frequency curve of partially reflecting surfaces, observed only close to the resonance frequency of the PRS, is exploited for this purpose. An example single-resonant PRS, based on a frequency-selective surface (FSS) composed of a printed slot array, was designed. Then it is used to design an EBG- resonator antenna to demonstrate the feasibility of achieving dual-band performance. Cavity models are employed, together with the reflection characteristics of the PRS, to understand the operation of the device at critical frequencies such as cavity resonance frequencies and the PRS resonance frequency. Antenna simulations and computed results confirm the dual-band operation of this very simple, single-layer, low- profile EBG-resonator antenna. It resonates in two bands centered at 10.5 GHz and 12.3 GHz. The peak directivity in each band is 18.2 dBi and 20.5 dBi, and the 3 dB directivity bandwidth of each band is 7.5% and 8.7%, respectively.

引用

页码：245 / 257

页数：12

共 12 条

[1]

Thevenot M., Cheype C., Reineix A., Jecko B., Directive photonic-bandgap antennas, IEEE Trans. Microwave Techniques and Theory, 47, 11, pp. 2115-2122, (1999)

[2]

Feresidis A.P., Vardaxoglou J.C., High gain planar antenna using optimized partially reflective surfaces, IEE Proc. Microwaves Antennas Propagat., 148, 6, pp. 345-350, (2001)

[3]

Weily A.R., Esselle K.P., Sanders B.C., Bird T.S., High gain 1D EBG resonator antenna, Microwave and Optical Technology Letters, 47, 2, pp. 107-114, (2005)

[4]

Weily A.R., Horvath L., Esselle K.P., Sanders B.C., Bird T.S., A planar resonator antenna based on a woodpile EBG material, IEEE Trans. Antennas Propag., 53, 1, pp. 216-223, (2005)

[5]

Ge Y., Esselle K.P., Hao Y., Design of low-profile highgain EBG resonator antennas using a genetic algorithm, IEEE Antennas and Wireless Propagation Letters, 6, pp. 480-483, (2007)

[6]

Lee Y., Yeo J., Mittra R., Park W., Application of electromagnetic bandgap (EBG) superstrates with controlable defects for a class of patch antennas with spatial angular filters, IEEE Trans. Antennas Propag., 53, 1, pp. 224-235, (2005)

[7]

Lee D.H., Lee Y.J., Yeo J., Mittra R., Park W.S., Design of novel thin frequency selective surface superstrates for dualband directivity enhancement, IET Microwaves, Antennas & Propagation, 1, 1, pp. 248-254, (2007)

[8]

Rodes E., Diblanc M., Arnaud E., Monediere T., Jecko B., Dual-band EBG resonator antenna using a single-layer FSS, IEEE Antennas and Wireless Propagation Letters, 6, pp. 368-371, (2007)

[9]

Pirhadi A., Hakkak M., Keshmiri F., Baee R.K., Design of compact dual band high directive electromagnetic bandgap (EBG) resonator antenna using artificial magnetic conductor, IEEE Trans. Antennas Propag., 55, 6, pp. 1682-1690, (2007)

[10]

Hajj M., Chantalat R., Jecko B., Design of a dual-band sectional antenna for Hiperlan2 application using double layers of metallic electromagnetic band gap (M-EBG) materials as a superstrate, International Journal of Antennas and Propagation, 2009, (2009)

← 1 2 →