Simulation of cold roll forming using elastic-plastic finite element method

被引：1

作者：

Chen, Xia ^{[1
]}

Chang, Qingming ^{[1
]}

Wang, Jiao ^{[1
]}

Chen, Changjun ^{[1
]}

机构：

[1] Key Laboratory for Ferrous Metallurgy, College of Materials and Metallurgy, Wuhan University of Science and Technology

来源：

International Journal of Modelling, Identification and Control | 2009年 / 7卷 / 01期

关键词：

Cold roll forming; Control; Elastic-plastic; Ffinite element method; Forming parameters; Longitudinal strain; Simulation;

D O I：

10.1504/IJMIC.2009.027030

中图分类号：

学科分类号：

摘要：

Based on large deformation elastic-plastic finite element method, utilising MARC software for 3D simulation of the tube while being out of shape, this paper analyses longitudinal strain of the tube in the course of roll shaping. Influence of different forming parameters such as the forming speed, the material properties and the friction coefficient have also been parametrically studied. The simulation results show that increasing the roll velocity, the material yield limit the longitudinal strain reduces. But increasing the friction coefficient, work-hardened material, inter-stand distances increase the longitudinal strain. This leads to a better insight and an efficient design for the complicated technological roll-forming process. The simulation of the tube shows that the method is suitable for the whole process simulation of cold roll forming. Copyright © 2009, Inderscience Publishers.

引用

页码：97 / 102

页数：5

共 9 条

[1]

Brunet M., Mguil S., Pol P., Modeling of a roll-forming process with a combined 2D and 3D FEM code, Journal of Material Processing Technology, 80-81, pp. 213-219, (1998)

[2]

Brunet M., Lay B., Pol P., Computer aided design of roll-forming of channel sections, Journal of Material Processing Technology, 60, pp. 209-214, (1996)

[3]

Han Z.W., Liu C., Lu W.P., Ren L.Q., Simulation of a multi-stand roll-forming process for thick channel section, Journal of Material Processing Technology, 127, pp. 382-387, (2002)

[4]

Heislitz F., Livatyali L., Ahmetoglu M.A., Kinzel G.L., Altan T., Simulation of roll forming process with the 3-D FEM code PAM-STAMP, Journal of Material Processing Technology, 59, pp. 59-67, (1996)

[5]

Hong S., Lee S., Kim N., A parametric study on forming length in roll forming, Journal of Materials Processing Technology, 113, pp. 113-118, (2001)

[6]

Lindgren M., Cold roll forming of a U-channel made of high strength steel, Journal of Material Processing Technology, 186, pp. 77-81, (2007)

[7]

Sheikh M., Palavilayil R.R., An assessment of finite element software for application to the roll-forming process, Journal of Material Processing Technology, 180, pp. 221-232, (2006)

[8]

Panton S.M., Zhu S.D., Duncan J.L., Geometric constraints on the forming path in roll forming channel sections, Proceedings of the Institution of Mechanical Engineers, 206, pp. 113-118, (1992)

[9]

Panton S.M., Duncan J.L., Zhu S.D., Longitudinal and shear strain development in cold roll forming, Journal of Materials Processing Technology, 60, pp. 219-224, (1996)

← 1 →