Analytical modeling on the stress evolution and oxidation process of metals in a high temperature

被引:2
作者
Wang, Ying [1 ]
Zhang, Yang [2 ]
Zhang, Xiancheng [2 ]
机构
[1] Jiangsu Province Special Equipment Safety Supervision Inspection Institute, Nanjing
[2] Key Laboratory of Pressure Systems and Safety of Ministry of Education, East China University of Science and Technology, Shanghai
来源
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2015年 / 51卷 / 12期
关键词
Creep; Model; Oxidation; Stress;
D O I
10.3901/JME.2015.12.036
中图分类号
学科分类号
摘要
Growth stress is generated during oxide scale growth process. At the same time, the growth process and integrity of oxide scale are significantly affected by the existence of growth stress. Particularly when mechanical loads are applied to the oxide/metal system, the situation becomes more complicated. Based on CLARKE's growth strain theory, a comprehensive analytical model is presented to predict the stress evolution and oxidation process of metals in a high temperature environment. The interaction among applied mechanical loads, elastic strain, growth strain, creep strain and scale thickness is clarified. The predicted result is accurate and reliable. Without any applied loads, growth stress is accumulated along with time. The maximum stress is reached where deforming rate of growth strain and creep strain are equal. After that, growth stress is drawn down gradually. Oxide stress is influenced by the mechanical loads. The scale growth rate is promoted by tensile loads while retarded by compressive loads. ©, 2015, Journal of Mechanical Engineering. All right reserved.
引用
收藏
页码:36 / 42
页数:6
相关论文
共 29 条
[1]  
Xuan F., Tu S., Wang Z., Time-dependent failure assessment diagram for integrity of defective structure at elevated temperature, Nuclear Power Engineering, 24, 6, pp. 508-513, (2003)
[2]  
Rao S., Zhou Y., Pan Z., Et al., Naphthenic acid corrosion behavior of 20G and Cr5Mo under high temperature, Journal of Mechanical Engineering, 49, 16, pp. 70-76, (2013)
[3]  
Guo W., Zhao M., Dong J., Et al., Research and development in FGH95 P/M nickel based superalloy, Journal of Mechanical Engineering, 49, 18, pp. 38-45, (2013)
[4]  
Feng Z., Cao R., Chen J., Microstructure and properties of Ti6Al4V-T2 lap welded joints by cold metal transfer technology, Journal of Mechanical Engineering, 50, 16, pp. 135-139, (2014)
[5]  
Tu S., Xuan F., Structure integrity technology for high temperature pressurized equipment, Pressure Vessel Technology, 22, 11, pp. 39-47, (2005)
[6]  
Sun Y., Pang C., Research on rotor creep properties under bending residual stress, Journal of Mechanical Engineering, 50, 18, pp. 162-166, (2014)
[7]  
Li H., Zhao G., He L., Et al., Research on constitutive relationship of hot stamping boron steel B1500HS at high temperature, Journal of Mechanical Engineering, 48, 8, pp. 21-27, (2012)
[8]  
Qian Y., Li M., Zhang Y., A review of high temperature oxidation of alloys under mechanical loading, Corrosion Science and Protection Technology, 13, 6, pp. 342-346, (2001)
[9]  
Han Y., Wang K., Liu Q., Effect of cold stretching on fatigue behavior of austenitic stainless steel at elevated temperature, Journal of Mechanical Engineering, 49, 12, pp. 32-37, (2013)
[10]  
Wang Z., Chen N., Wang L., Et al., Application of multifractal in high temperature fatigue damage, Journal of Mechanical Engineering, 49, 14, pp. 59-64, (2013)