Influence of heat treatment regime on corrosion resistance of clad aluminium alloy

被引：0

作者：

Kusmierczak S. ^{[1
]}

Peslova F. ^{[2
]}

Naprstkova N. ^{[1
]}

机构：

[1] Faculty of Mechanical Engineering, J. E. Purkyne University in Usti nad Labem, Pasteurova 3334/7, Usti nad Labem

[2] Faculty of Industrial Technologies, Alexander Dubèek University of Trenčín, Ivana Krasku 491/30, Púchov

来源：

Manufacturing Technology | 2019年 / 19卷 / 04期

关键词：

Aluminium alloys; Cladding; Corrosion resistance; Heat treatment; REM;

D O I：

10.21062/ujep/345.2019/a/1213-2489/MT/19/4/624

中图分类号：

学科分类号：

摘要：

Al-Cu-Mg based alloys are often used in the automotive industry. There are characterized by high strength characteristics but poor corrosion resistance, which appears to be problematic in this sector. The manufactured blanks of these alloys may be protected by some of the barrier protection methods, including cladding. Semifinished products made of these methods can be protected against corrosion by a thin layer of aluminium oxides -called clad Durals. The surface layer creates a stable and durable Al2O3 layer, which provides corrosion resistance, which leads to an extended service life of the piece. However, this type of protection is adversely affected by the effect of copper diffusion, which is dependent on the heat treatment mode of the alloy. Temperature and temperature hold are the main factors influencing the diffusion process. In the solution annealing of aluminium alloys, the temperature is in the range of (470-500) ° C, resulting in intense diffusion processes at the inter phases interfacial. The paper deals with the analysis of the influence of the heat treatment regime on the corrosion resistance of Al2024 alloy sheets (AlCu4Mg1 type alloy) provided with an Al1050 alloy clad coating on both sides in a corrosive salt mist environment in accordance with EN ISO 9227, which is supposed to have a positive effect on extending the service life of a car component. © 2019. Published by Manufacturing Technology.

引用

页码：624 / 631

页数：7

共 18 条

[1]

Michna S., Et al., Aluminium Materials and Technologies from A to Z, Adin, (2007)

[2]

Uhricik M., Palcek P., Chalupova M., Orsulova T., The structure of the aluminium alloy and its influence on the fatigue properties, In: Manufacturing Technology, 17, 5, pp. 863-869, (2017)

[3]

Hren I., Michna S., Drozdyk L., Cais J., Michnova L., Svobodova J., Hodinar L., Research of the influence on the modification of beryllium in Al-Si alloy, In: Metallofizika i Noveishie Tekhnologii, 40, 12, pp. 1637-1647, (2018)

[4]

Michna S., Hren I., Svobodova J., The research of the effect of high Fe content on AlSi9NiCuMg0.5 alloy, In: Manufacturing Technology, 19, 1, pp. 107-113, (2019)

[5]

Naprstkova N., Kraus P., Stancekova D., Calcium and its using for modification of ALSI7MG0.3 alloy from view of final microstructure and hardness, In: Engineering for Rural Development, 17, pp. 2003-2008, (2018)

[6]

Naprstkova N., Kraus P., Sviantek J., Nguyen Van T., Influence of Ca, Sb and heat treatment on AlSi9CuMnNi alloy in frame of their properties from view of machining, In: MATEC Web of Conferences, 244, (2018)

[7]

Podprocka R., Bolibruchova D., The role of manganese in the alloy based on Al-Si-Mg with higher iron content, In: Manufacturing Technology, 18, 4, pp. 650-654, (2018)

[8]

Sarychev V.D., Ivanov Y.F., Nevskii S.A., Serenkov Y.S., Vysotskaya E.A., Gromov V.E., Mechanisms of nanoscale structure formation during electron beam treatment of silumin, In: IOP Conference Series: Materials Science and Engineering, 447, 1, (2018)

[9]

Korczak P., Plonka B., Lesniak D., Nowak M., Remsak K., Boczkal S., Studies on the magnesium alloys cladding in the plastic forming processes (die forging and extrusion) using as the clad layer corrosion resistant aluminum alloys, In: Magnesium Technology, pp. 257-262, (2015)

[10]

Cepeda-Jimenez C.M., Pozuelo M., Ruano O.A., Carreno F., Influence of the thermomechanical processing on the fracture mechanisms of high strength aluminium/pure aluminium multilayer laminate materials, In: Materials Science and Engineering A, 490, 1-2, pp. 319-327, (2008)

← 1 2 →