Aligned steel fibre reinforced cement based composites(I): Orientation control of steel fibres

被引：0

作者：

Mu, Ru ^{[1
]}

Qiu, Xin ^{[1
]}

Zhao, Quanming ^{[2
]}

Li, Hui ^{[1
]}

机构：

[1] School of Civil Engineering, Hebei University of Technology, Tianjin

[2] School of Information Engineering, Hebei University of Technology, Tianjin

来源：

Jianzhu Cailiao Xuebao/Journal of Building Materials | 2015年 / 18卷 / 02期

关键词：

Aligned steel fibre; Orientation factor of steel fibres; Preparation method; Steel fibre reinforced cement paste;

D O I：

10.3969/j.issn.1007-9629.2015.02.005

中图分类号：

学科分类号：

摘要：

The force state and the rotational motion of single steel fibre in cement paste subjected to magnetic force caused by external uniform magnetic field were analysed. The relationship among the rotating accelerated angular velocity of steel fibre and the magnetic induction, working time of magnetic field was obtained. Based on this relationship, the magnetic induction and working time of magnetic field were calculated according to the designed orientation of steel fibre, and the preparation conditions for aligned steel fibre reinforced cement paste was confirmed. Based on the theoretical calculation result, an aligned steel fibre reinforced cement paste specimen was prepared using external uniform magnetic field with magnetic induction 1.13×10-5T for 60s, the orientation distribution of steel fibres in cement paste specimen was tested. The test results show that for nearly 80% of steel fibres in the cement paste specimen, their orientations are in close agreement with designed orientation, and the orientation factor of steel fibres reaches 0.968. ©, 2015, Tongji University. All right reserved.

引用

页码：208 / 213

页数：5

共 5 条

[1] Tian W., Mu R., Zhao Q., Method and equipment for preparation of aligned steel fibre reinforced cement paste, (2010)
[2] Mu R., Zhao Q., Tian W., Investigation on the preparation and properties of aligned steel fiber reinforce cement paste, Journal of Hebei University of Technology, 41, 2, pp. 101-104, (2012)
[3] Wang Y., Calculation of magnetic force of permanent magnet devices, Journal of Magnetic Materials and Devices, 38, 5, pp. 49-60, (2007)
[4] Zhou J., Research the where abouts of l≫d cylinder in viscous liquid, Physical Experiment of College, 52, 4, pp. 87-89, (2012)
[5] Soroushian P., Lee C., Distribution and orientation of fibers in steel fiber reinforced concrete, ACI Materials Journal, 87, 5, pp. 433-439, (1990)

← 1 →