Calibration of 1 m aperture infrared theodolite

被引：7

作者：

Li, Ning ^{[1
]}

Zhang, Yun-Feng ^{[1
]}

Liu, Chun-Xiang ^{[1
]}

Cao, Li-Hua ^{[1
]}

Guo, Li-Hong ^{[1
]}

机构：

[1] Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun

来源：

Guangxue Jingmi Gongcheng/Optics and Precision Engineering | 2014年 / 22卷 / 08期

关键词：

Infrared measuring system; Monochromator; Radiation calibration; Radiation characteristics; Spectral response;

D O I：

10.3788/OPE.20142208.2054

中图分类号：

学科分类号：

摘要：

To measure infrared radiation characteristics of air targets, the calibration system for a 1 m aperture infrared measurement system was designed. A mathematic model of calibration for the infrared measurement system was given and a radiometric calibration system was established by combinations of a cavity blackbody and a collimator as the standard radiation source. Because the spectral response of the infrared measuring system is selective, the calibration principle based on conventional radiometric calibration method has theoretical errors and reduces the precision of radiometric calibration. To solve the problem, a relative spectral calibration method based on a monochromator and a standard radiometer was proposed. The mathematical model was given and a relative spectral calibration was performed. Finally, the experiments on radiation characteristic measurement were performed in the field by using the blackbody as a simulated target. The results show that the measurement max error from the 1 m aperture infrared radiation characteristic measurement system is 9.5% and improves by an average of 8.7% as compared with that of the conventional method. These show that the proposed method meets the requirements of practical applications and is suitable for the radiometric calibration in the out-fields.

引用

页码：2054 / 2060

页数：6

共 11 条

[1]

Yang L.H., Xiao Q.S., Jiang S.P., An overview of the radiometric calibration facility for infrared sensors, Spacecraft Environment Engineering, 30, 1, pp. 34-39, (2013)

[2]

Zhang X., Jia H.G., Optical design of infrared athermalized objective with large relative aperture, Chinese Optics, 4, 4, pp. 374-379, (2011)

[3]

Li N., Yang C.Y., Cao L.H., Et al., Radiance calibration for 3~5 μm infrared focal plane array, 19, 10, pp. 2319-2325, (2011)

[4]

Tang J., Gao X., Calibration method for infrared radiation characteristics measuring system of test range, Infrared and Laser Engineering, 35, S1, pp. 266-270, (2006)

[5]

Chang P., Li C.R., Li T.M., Kinematic calibration and forecast error compensation of a 2-DOF planar parallel manipulator, Chinese Journal of Mechanical Engineering, 24, 6, pp. 992-998, (2011)

[6]

Xiu J.H., Huang P., Li J., Et al., Radiometric calibration of large area array color CCD aerial mapping camera, 20, 6, pp. 1365-1373, (2012)

[7]

Wang R., Wang S.R., Guo J., Et al., Calibration of high accuracy UV standard detector, 20, 8, pp. 1696-1703, (2012)

[8]

Yu L., Lin G.Y., Chen B., Study on the absolute spectral irradiation calibration method for far ultraviolet spectrometer in remote sensing, Spectroscopy and Spectral Analysis, 33, 1, pp. 246-249, (2013)

[9]

Zhang X.L., Liu Y., Sun Q., Radiometric calibration of uncooled long-wave infrared thermal imager with high-precison, Chinese Optics, 5, 3, pp. 235-241, (2012)

[10]

Cao L.H., Li N., Yang C.Y., Et al., Radiance calibration for 3-5 μm infrared detector, Infrared and Laser Engineering, 41, 4, pp. 858-864, (2012)

← 1 2 →