Microstructure and properties evolution of Cu-Ti-Cr-Mg alloy during thermomechanical treatment

被引：1
|
作者：
Wei, Hongli [1 ]
Wei, Huan [2 ]
Du, Huayun [1 ]
Wei, Yinghui [1 ]
Hou, Lifeng [1 ]
机构：
[1] College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan
[2] College of Aeronautics and Astronautics, Taiyuan University of Technology, Taiyuan
来源：
Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals | 2024年 / 34卷 / 09期
基金：
中国国家自然科学基金;
关键词：
aging treatment; Cu-Ti alloy; microstructure; precipitation strengthening;
D O I：
10.11817/j.ysxb.1004.0609.2024-44791
中图分类号：
学科分类号：
摘要：
Alloying is one of the main methods to improve the performance of Cu-Ti alloys, and it is expected to obtain high performance to replace Cu-Be alloys. A Cu-4Ti-0.5Cr-1Mg alloy was designed, and the effects of thermomechanical treatment on the microstructure and properties of the alloy were investigated. Optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffractometry (XRD) were used to analyze the microstructure and phase constituents, and the mechanical properties and electrical conductivity of the material were determined as well. The results show that the addition of Cr and Mg alloy elements does not change the aging sequence of Cu-Ti alloy, but lead to the formation of Cr2Ti intermetallic compounds, and precipitation of β-Cu4Ti phase is inhibited with the increase of the aging time. After 40% cold rolling and 380 ℃ aged for 1 h, the alloy can acquire excellent comprehensive properties, the hardness and strength are 350HV and 1220 MPa, respectively, and the conductivity is 10.84%IACS. The ultra-high strength of design alloys is mainly attributed to β′-Cu4Ti dispersion precipitation strengthening and work hardening. © 2024 Central South University of Technology. All rights reserved.
引用
收藏
页码：2966 / 2977
页数：11
相关论文
共 39 条
  • [1] ZHANG W W, ZHAO Z H, FANG J H, Et al., Evolution and strengthening mechanism of metastable precipitates in Cu-2.0 wt% Be alloy, Journal of Alloys and Compounds, 857, (2021)
  • [2] HUANG X X, XIE G L, LIU X H, Et al., The influence of precipitation transformation on Young’s modulus and strengthening mechanism of a Cu-Be binary alloy, Materials Science and Engineering A, 772, (2020)
  • [3] LI C, WANG X H, LI B, Et al., Effect of cold rolling and aging treatment on the microstructure and properties of Cu-3Ti-2Mg alloy, Journal of Alloys and Compounds, 818, (2020)
  • [4] ROUXEL B, CAYRON C, BORNAND J, Et al., Micro-addition of Fe in highly alloyed Cu-Ti alloys to improve both formability and strength, Materials & Design, 213, (2022)
  • [5] JING Q X, SUN Y Q, XIAO X P, Et al., Effect of thermomechanical heat treatment on microstructure and properties of Cu-Ti-Fe-Sn alloy, Heat Treatment of Metals, 47, 10, (2022)
  • [6] LI S, LI Z, ZHU X, Et al., Microstructure and property of Cu-2.7Ti-0.15Mg-0.1Ce-0.1Zr alloy treated with a combined aging process[J], Materials Science and Engineering A, 650, (2016)
  • [7] WANG H, MO Y D, LOU H F., Microstructure and properties of a novel Cu-3Ti-0.1Mg-0.05B-0.05 La alloy with high strength and conductivity, Chinese Journal of Engineering, 45, 2, (2023)
  • [8] HUANG F, YU F X, FENG G B, Et al., Development and application of high strength and high elasticity copper-titanium alloys, Special Casting & Nonferrous Alloys, 40, 5, (2020)
  • [9] YANG H Y, MA Z C, LEI C H, Et al., High strength and high conductivity Cu alloys: A review[J], Science China Technological Sciences, 63, 12, (2020)
  • [10] JIANG Y X, LOU H F, XIE H F, Et al., Development status and prospects of advanced copper alloy[J], Strategic Study of CAE, 22, 5, (2020)
1234