Effects of the coordinates planes crystal orientation on the structural strength of single-crystal turbine vanes and blades

被引：0

作者：

Chen, Jinxiang ^{[1
]}

Hashimoto, Ryosaku ^{[1
]}

Fukuyama, Yoshitaka ^{[1
]}

Matsushita, Masahiro ^{[1
]}

Ogawa, Akinori ^{[1
]}

Osawa, Makoto ^{[1
]}

Yokokawa, Tadaharu ^{[1
]}

Harada, Hiroshi ^{[1
]}

机构：

[1] Clean Engine Team, Japan Aerospace Exploration Agency, Chofu-shi, Tokyo, 182-8522

来源：

Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A | 2006年 / 72卷 / 04期

关键词：

Anisotropy; Elasticity; Orientation; Single-Crystal; Structural Analysis; Thermal Stress; TMS-75;

D O I：

10.1299/kikaia.72.432

中图分类号：

学科分类号：

摘要：

The effects of crystal orientation (θ) on the structural strength of single crystal trubine vanes and blades calculated with the finite element method (FEM) are discussed in this paper. TMS-75, a 3rd generation single-crystal Ni-base superalloy, is chosen as the model material for turbine vanes and blades. It became clear that, (1) the elastic constant matrix changes were equivalence for each of three coordinate due to the orientation variation (0° < θ < 90°), and the strength of the turbine vane and blade were strongly related to θ, and also depended on the load and model shape. (2) The strength dependence of the turbine vane on the crystal orientation was depended on coordinate plane: there are lower Mises stress in XY plane and maximum Mises stress in near the θ = 45° at both YZ and ZX Planes. (3) In the case of a blade, the influence is similar to the vane on blade tip, but the converse holds for the blade root. It is clear that the creep rupture time can be extended, when the 〈100〉 crystallographic axes is the Y or X axis of the blade under higher revolution speed.

引用

页码：432 / 437

页数：5

共 19 条

[1] Harada H., Okaxaki M., High temperature strength of NI-based superalloys and coatings for advanced gas turbines, Journal of the Society of Materials Science, 51, 7, pp. 836-842, (2002)
[2] Lambropoulos J.C., The isotropic assumption during the Czochralski growth of single semiconductors crystals, Journal of Crystal Growth, 84, 3, pp. 349-358, (1987)
[3] Chen J., Et al., Structural strength change by single crystallization of turbine blades and vanes, Journal of the Society of Materials Science, 54, 3, pp. 251-256, (2005)
[4] Miyazaki N., Et al., Elastic constant matrix required for thermal stress analysis of bulk single crystals during czochralski growth, Journal of Crystal Growth, 106, pp. 149-156, (1990)
[5] Miyazaki N., Et al., Thermal stress analysis of bulk single crystals during CZ growth: Anisotropic effects in various single crystals, Transactions of the Japan Society of Mechanical Engineers, Series A, 58, 554, pp. 1942-1946, (1992)
[6] Jordan A.S., A thermoelastic analysis of dislocation generation in pulled GaAs crystals, The Bell System Technical Journal, 59, pp. 593-636, (1980)
[7] Miyazaki N., Et al., Thermal stress analysis of bulk single crystal during czochralski growth: Comparison between anisotropic analysis and isotropic analysis, Transactions of the Japan Society of Mechanical Engineers, Series A, 57, 536, pp. 858-863, (1991)
[8] Ohno N., Et al., Multiaxial creep of a nickel-base directionally solidified alloy: Anisotropy and simulation, Acta Materialia, 40, 3, pp. 559-567, (1992)
[9] Mizuno T., Ohno N., Anisotropy in multiaxial creep of a nickel-base single-crystal superalloy CMSX-2 (2<sup>nd</sup> report, discussion based on 3D finite-element analysis), Transactions of the Japan Society of Mechanical Engineers, Series A, 58, 556, pp. 2446-2452, (1992)
[10] Okazaki M., Et al., Nucleation of cellular colonies in single crystal Ni-based superalloy subjected to previous damage and influence on high temperature fatigue strength, Journal of the Society of Materials Science, 50, 2, pp. 94-100, (2001)

← 1 2 →