Gas membrane flow field approximate calculation and analysis of spiral groove dry gas seal on the force distortion

被引：0
|
作者：
机构：
[1] College of Petrochemical Engineering, Lanzhou University of Technology, Lanzhou
来源：
Ding, X.-X. (dingxx1@163.com) | 1600年 / Tsinghua University卷 / 30期
关键词：
Dry gas seal; Forced deformation; Gas film thickness; Leakage; Maple program;
D O I：
10.6052/j.issn.1000-4750.2012.05.S035
中图分类号：
学科分类号：
摘要：
The pressure distributions function is obtained not considering the seal rings' deformation, based on the Reynolds equation under the slid boundary conditions. Changing with the revolving speeds and pressure of fluid in the spiral groove, the corners and deformations of the sealing surface distributions are solved, and the approximate analytic of the corresponding gas film thickness is obtained. Meanwhile, the theoretical leakage not considering forced deformation is obtained by using the Generalized Reynolds Equation. The Maple software is applied to solve the leakages with the forced deformation in the seal ring. The leakages are calculated out and compared with the theoretical values under different pressures. The result shows that with an increasing of pressure, the leakage is increased alone the radial from the outside to inside. In the same condition, the leakage considering forced deformation is closer to the experimental values, compared with theoretical values. Thus it affects the sealing performance.
引用
收藏
页码：279 / 283
页数：4
相关论文
共 12 条
  • [1] Gad-El-hak M., The fluid mechanics of micro devices-The freeman scholar lecture, Transactions of the ASME, Journal of Fluids Engineering, 121, 1, pp. 5-33, (1999)
  • [2] Gad-El-hak M., Flow physics in MEMS, Mecanique and Industries, 2, 4, pp. 313-341, (2001)
  • [3] Kassner M.E., Nemat-Nasser S., Suo Z., Et al., New directions in mechanics, Mechanics of Materials, 37, 2-3, pp. 231-259, (2005)
  • [4] Beskok A., Karniadakis G.E., Trimmer W., Rarefaction and compressibility effects in gas micro flows, Journal of Fluids Engineering, 118, 5, pp. 448-456, (1996)
  • [5] Zhang B., Xiao M., Analysis and calculation of inside mechanic seal deformation, Machinery Design & Manufacture, 1, pp. 62-63, (2003)
  • [6] Gu Y., Mechanical Face Seal, (1994)
  • [7] Zhang S., Gu Y., Study on the deformation of mechanical face seal, Journal of the University of Petroleum, 2, pp. 48-53, (1992)
  • [8] Stolarski T.A., Xue Y., Proceedings of the Institution of Mechanical Engineers. Part J: Journal of Engineering Tribology, 212, 4, pp. 279-290, (1998)
  • [9] Wang M., Dong X., Thermal and mechanical deformations of herringbone spiral groove mechanical seal, Fluid Engineering, 20, 5, pp. 34-38, (1992)
  • [10] Ding X., Chen D., Zhang W., Yu S., Du Z., Approximate calculation and parameters optimization for micro-scale flow field in spiral grooved gas seal, Chinese Journal of Applied Mechanics, 24, 3, pp. 425-428, (2007)
12