Laser welding-brazing characteristics of dissimilar metals Mg/Ti with al interlayers

被引：0
作者：
Tan, Caiwang [1 ,3 ]
Gong, Xiangtao [2 ]
Li, Liqun [3 ]
Feng, Jicai [1 ,3 ]
机构：
[1] Shandong Provincial Key Laboratory of Special Welding Technology, Harbin Institute of Technology at Weihai, Weihai, 264209, Shandong
[2] School of Automotive Engineering, Harbin Institute of Technology at Weihai, Weihai, 264209, Shandong
[3] State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, 150001, Heilongjiang
来源：
Zhongguo Jiguang/Chinese Journal of Lasers | 2015年 / 42卷 / 01期
关键词：
Dissimilar materials; Laser welding; Magnesium alloys; Optical fabrication; Titanium alloys;
D O I：
10.3788/CJL201542.0103002
中图分类号：
学科分类号：
摘要：
The metallurgical bonding and reliable joining of Mg/Ti dissimilar metals are restricted by their nonreactive and immiscible characteristics. To overcome this problem, laser lap joining of Mg/Ti with addition of Al interlayer is carried out. Well appearances are obtained by adjusting the welding parameters. Elemental distribution across the interface and bonding mechanism are studied. The results indicate that wettability of Mg/Ti is improved with the help of Al interlayer, and thus metallurgical bonding is accelerated. When the thickness of Al interlayer is 50 μm, the shear force reaches 1010N/cm, which is 1.8 times as much as that without Al interlayer. The interfacial microstructure indicates that AlTi3 phase forms at the direct laser irradiation zone, while α -Ti is at the zone around it at the interface. The second phases in the weld zone increase with the increase of thickness of Al interlayer. The tensile-shear force decreases when network structure is formed in the weld zone. ©, 2014, Science Press. All right reserved.
引用
收藏
页数：8
相关论文
共 50 条
[41]   Study of Weld Characteristics in Friction Stir Welding of Dissimilar Mg-Al-Zn Magnesium Alloys under Varying Welding Conditions [J].
Umesh Kumar Singh ;
Avanish Kumar Dubey .
Journal of Materials Engineering and Performance, 2021, 30 :7690-7703
[42]   Influence of Ni interlayer width on interfacial reactions and mechanical properties in laser welding/brazing of Al/Mg lap joint [J].
Yang, J. ;
Su, J. H. ;
Yu, Z. S. ;
Zhang, G. Z. ;
Lin, S. B. ;
Li, Y. L. ;
Zhou, N. Y. .
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2020, 25 (01) :37-44
[43]   Dissimilar joining of Al/Mg light metals by compound casting process [J].
E. Hajjari ;
M. Divandari ;
S. H. Razavi ;
S. M. Emami ;
T. Homma ;
S. Kamado .
Journal of Materials Science, 2011, 46 :6491-6499
[44]   The Feasibility of Static Shoulder Friction Stir Welding in Joining Dissimilar Metals of Al6061 and Ti6Al4V [J].
Sundar, Saravana A. ;
Kar, Amlan ;
Mugada, Krishna Kishore ;
Kumar, Adepu .
METALS, 2024, 14 (01)
[45]   Heat Transfer and Structural Characteristics of Dissimilar Joints Joining Ti-64 and NiTi via Laser Welding [J].
Glaspell, Aspen ;
De la Pena, Jose Angel Diosdado ;
Dahal, Saroj ;
Neupane, Sandesh ;
Ryu, Jae Joong ;
Choo, Kyosung .
ENERGIES, 2022, 15 (19)
[46]   Material flow during dissimilar friction stir welding of Al/Mg alloys [J].
Yang, Chengle ;
Chen, Gaoqiang ;
Qiao, Junnan ;
Wu, Chuansong ;
Zhou, Mengran ;
Zhang, Gong ;
Shi, Qingyu .
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2024, 272
[47]   Benefits of interfacial regulation with interlayers in laser welding Ti6Al4V/316L steel [J].
Li, Junzhao ;
Liu, Yibo ;
Gao, Yifan ;
Jin, Peng ;
Sun, Qingjie ;
Feng, Jicai .
OPTICS AND LASER TECHNOLOGY, 2020, 125
[48]   Laser welding of aluminum/steel dissimilar metals and control of intermetallic compounds: a review [J].
Li, Qiubo ;
Yang, Shanglei ;
Hu, Bangguo ;
Xue, Suqi .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2025, 137 (9-10) :4283-4308
[49]   Numerical study of Heat Modes of laser welding of dissimilar metals with an intermediate insert [J].
Isaev, V. I. ;
Cherepanov, A. N. ;
Shapeev, V. P. .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2016, 99 :711-720
[50]   Prediction of Weld Pool Profile of Dissimilar Laser Weld Between NiTi/Ti6Al4V Via Different Interlayers [J].
Teshome, Fissha Biruke ;
Peng, Bei ;
Ke, Wenchao ;
Ge, Fuguo ;
Du, Xuying ;
Zeng, Zhi .
2021 7TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND AUTOMATION (ICMEAS 2021), 2021, :107-112
12345