High ductility of ultrafine-grained steel via phase transformation

被引：0

作者：

Department of Materials Science and Engineering, University of Tennessee, Knoxville, TN 37996, United States ^{[1
]}

不详 ^{[2
]}

不详 ^{[3
]}

不详 ^{[4
]}

不详 ^{[5
]}

不详 ^{[6
]}

机构：

[1] Department of Materials Science and Engineering, University of Tennessee, Knoxville

[2] Neutron Scattering Science Division, Oak Ridge National Laboratory, Oak Ridge

[3] Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge

[4] Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos

[5] Advanced Photon Source, Argonne National Laboratory, Argonne

[6] Department of Metallurgical Engineering, Yonsei University

来源：

J Mater Res | 2008年 / 6卷 / 1578-1586期

基金：

美国国家科学基金会;

关键词：

Ductility;

D O I：

10.1557/jmr.2008.0213

中图分类号：

学科分类号：

摘要：

There is often a tradeoff between strength and ductility, and the low ductility of ultrafine-grained (UFG) materials has been a major obstacle to their practical structural applications despite their high strength. In this study, we have achieved a ∼40% tensile ductility while increasing the yield strength of FeCrNiMn steel by an order of magnitude via grain refinement and deformation-induced martensitic phase transformation. The strain-rate effect on the inhomogeneous deformation behavior and phase transformation was studied in detail. © 2008 Materials Research Society.

引用

页码：1578 / 1586

页数：8

共 25 条

[11]

Lee Y.K., Jin J.E., Ma Y.Q., Transformation-induced extraordinary ductility in an ultrafine-grained alloy with nanosized precipitates, Scripta Mater, 57, (2007)

[12]

Zhou Y.Z., Zhang W., Wang B.Q., He G.H., Guo J.D., Grain refinement and formation of ultrafine-grained microstructure in a low-carbon steel under electropulsing, J. Mater. Res, 17, (2002)

[13]

Tsuji N., Ueji R., Minamino Y., Saito Y., A new and simple process to obtain nano-structured bulk low-carbon steel with superior mechanical property, Scripta Mater, 46, (2002)

[14]

Sugimoto K., Usui N., Kobayashi M., Hashimoto S., Effects of volume fraction and stability of retained austenite on ductility of TRIP-aided dual-phase steels, ISIJ Int, 32, (1992)

[15]

Matsumura O., Sakuma Y., Takechi H., TRIP and its kinetic aspects in austempered 0.4C-1.5Si-0.8Mn steel, Scripta Metall, 21, (1987)

[16]

Ma Y.Q., Jin J.E., Lee Y.K., A repetitive thermomechanical process to produce nano-crystalline in a metastable austenitic steel, Scripta Mater, 52, (2005)

[17]

Ma Y.Q., Jin J.E., Lee Y.K., Grain refinement and mechanical properties of a metastable austenitic Fe-Cr-Ni-Mn alloy, Mater. Sci. Forum, 475, (2005)

[18]

Huang J.Y., Zhu Y.T., Jiang H.G., Lowe T.C., Microstructures and dislocation configurations in nanostructured Cu processed by repetitive corrugation and straightening, Acta Mater, 49, (2001)

[19]

Tao K., Choo H., Li H., Clausen B., Jin J.E., Lee Y.K., Transformation-induced plasticity in an ultrafine-grained steel: An in situ neutron diffraction study, Appl. Phys. Lett, 90, (2007)

[20]

Bouquerel J., Verbeken K., de Cooman B.C., Microstructure-based model for the static mechanical behaviour of multiphase steels, Acta Mater, 54, (2006)

← 1 2 3 →