Stress corrosion cracking behavior of X80 pipeline steel with design factor of 0.8 in near-neutral Ph value solutions

被引：0
作者：
Yang, Dong-Ping [1 ]
Xu, Cong-Min [1 ]
Luo, Jin-Heng [2 ]
Wang, Ke [2 ]
Li, Hui-Hui [1 ]
机构：
[1] Key Laboratory of Materials Processing Engineering, College of Materials Science and Engineering, Xi'an Shiyou University, Xi'an
[2] Key Laboratory for Mechanical and Environmental Behavior of Tubular Goods, CNPC Tubular Goods Research Institute, Xi'an
来源：
Cailiao Gongcheng/Journal of Materials Engineering | 2015年 / 43卷 / 01期
关键词：
Slow strain rate tension; Stress corrosion cracking; X80 pipeline steel;
D O I：
10.11868/j.issn.1001-4381.2015.01.016
中图分类号：
学科分类号：
摘要：
Stress corrosion cracking (SCC) behavior and sensitivity of X80 pipeline steel and weld joint in NS4 solutions were investigated using slow strain rate tension (SSRT) test. The results show that X80 pipeline steel and weld joint appear mainly plastic damage. The plastic damage of weld joint is higher than that of base metal. The fracture mode of X80 pipeline steel and weld joint exhibits typical ductile fracture in the air, and the transgranular SCC in NS4 solution. Both base metal and weld joint fracture's middle areas of X80 pipeline steel exhibit more obvious brittle fracture feature than that of the edge area in NS4 solutions. The corrosion mechanism of X80 steel is anodic dissolution (AD) above -749.86 mV, and the mixed mechanism of AD and hydrogen embrittlement (HE) between -749.86- -839.19 mV, and HE mechanism below-839.19 mV. ©, 2014, Cailiao Gongcheng/Journal of Materials Engineering. All right reserved.
引用
收藏
页码：89 / 95
页数：6
相关论文
共 20 条
  • [1] Xiao J., Wu M., Chen X., Et al., Effect of applied potential on stress corrosion behaviors of X80 pipeline steel in Ku'erle soil simulated solution, Hot Working Technology, 39, 18, pp. 28-30, (2010)
  • [2] Fang B.Y., Atrens A., Wang J.Q., Review of stress corrosion cracking of pipeline steels in “ low” and “ high” pH solutions, Journal of Materials Science, 38, 1, pp. 127-132, (2003)
  • [3] Manfredi C., Otegui J.L., Failures by SCC in buried pipelines, Engineering Failure Analysis, 9, 5, pp. 495-509, (2002)
  • [4] Meng X., Yu H.-Y., Cheng Y., Et al., Stress corrosion susceptibility of X80 pipeline steel in simulated solution of Zhangshu area soil, Materials for Mechanical Engineering, 36, 8, pp. 46-50, (2012)
  • [5] Cheng Y., Yu H.-Y., Wang Y., Et al., Effect of strain rate on stress corrosion cracking of X80 pipeline steel, Journal of Materials Engineering, 3, pp. 77-82, (2013)
  • [6] Xia Y.-Z., Li H., Hu N.-N., Et al., Effect of applied cathode potential on the behavior of near-neutral pH SCC of X100 pipeline steel, Journal of Sichuan University, 45, 4, pp. 186-191, (2013)
  • [7] Cheng Y., Yu H.-Y., Wang Y., Et al., Effect of applied potentials on stress corrosion cracking of X80 steel in simulated Nanxiong soil solution, Corrosion & Protection, 34, 1, pp. 13-17, (2013)
  • [8] Wang B.-Y., Huo L.-X., Wang D.-P., Et al., Stress corrosion cracking of X80 pipeline steel in near-neutral pH values solutions, Journal of Tianjin University, 40, 6, pp. 757-760, (2007)
  • [9] Chen X., Wu M., He C., Et al., Effect of applied potential on SCC of X80 pipeline steel and its weld joint in Ku'erle soil simulated solution, Acta Metallurgica Sinica, 46, 8, pp. 951-958, (2010)
  • [10] Kentish P.J., Gas pipeline failures: Australian experience, Corrosion Engineering, Science and Technology, 20, 3, pp. 139-146, (1985)
12