Restoring Force Surface-Based Parameter Identification Method for Negative Stiffness Nonlinear System

被引：0

作者：

Hu F. ^{[1
]}

Liu Q. ^{[1
]}

Cao J. ^{[1
]}

Zhang Y. ^{[1
]}

机构：

[1] Key Laboratory of Education Ministry for Modern Design and Rotor-Bearing System, Xi'an Jiaotong University, Xi'an

来源：

Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University | 2021年 / 55卷 / 04期

关键词：

Negative stiffness oscillator; Nonlinear restoring force; Restoring force surface;

D O I：

10.7652/xjtuxb202104011

中图分类号：

学科分类号：

摘要：

Aiming at the difficulty in identifying the restoring force of a nonlinear oscillator with negative stiffness, a time-domain nonparametric identification method based on restoring force surface is proposed. The numerical processing schemes of displacement differentiation and acceleration integration are compared and analyzed. A method for drawing three-dimensional restoring force surface diagrams of four typical negative stiffness oscillators and extracting stiffness and damping restoring forces by experimental data is given. This approach shows that the identification accuracy of the polynomial stiffness force and the damping force coefficient can reach more than 95% in the numerical simulation of the four negative stiffness vibrators. Frequency sweep experiment is carried out on the multi-stable oscillators at different acceleration levels by building an experimental platform. Following the designing idea, the restoring force surface of the multi-stable state vibrator is constructed. The surface recognition result coincides with the measured restoring force surface, which verifies the effectiveness of the complex force surface method in identifying the negative stiffness nonlinear oscillators, and this method is also applicable to the nonlinear analysis in the fields of energy harvesting and vibration control. © 2021, Editorial Office of Journal of Xi'an Jiaotong University. All right reserved.

引用

页码：95 / 106

页数：11

共 25 条

[1]

HARNE R L, WANG K W., Harnessing bistable structural dynamics, pp. 181-290, (2017)

[2]

STANTON S C, MCGEHEE C C, MANN B P., Nonlinear dynamics for broadband energy harvesting: investigation of a bistable piezoelectric inertial generator, Physica: D Nonlinear Phenomena, 239, 10, pp. 640-653, (2010)

[3]

ZHU Pei, REN Xingmin, QIN Weiyang, Et al., Improving energy harvesting in a tri-stable piezomagnetoelastic beam with two attractive external magnets subjected to random excitation, Archive of Applied Mechanics, 87, 1, pp. 45-57, (2017)

[4]

ZHOU Shengxi, CAO Junyi, ERTURK A, Et al., Nonlinear model for piezoelectric energy harvester with magnetic coupling, Journal of Xi'an Jiaotong University, 48, 1, pp. 106-111, (2014)

[5]

CAO Junyi, ZHOU Shengxi, INMAN D J, Et al., Nonlinear dynamic characteristics of variable inclination magnetically coupled piezoelectric energy harvesters, Journal of Vibration and Acoustics, 137, 2, (2015)

[6]

ZHOU Zhiyong, QIN Weiyang, ZHU Pei, Improve efficiency of harvesting random energy by snap-through in a quad-stable harvester, Sensors and Actuators: A Physical, 243, pp. 151-158, (2016)

[7]

NAMMARI A, CASKEY L, NEGRETE J, Et al., Fabrication and characterization of non-resonant magneto-mechanical low-frequency vibration energy harvester, Mechanical Systems and Signal Processing, 102, pp. 298-311, (2018)

[8]

MALATKAR P, NAYFEH A H., A plethora of nonlinear dynamics phenomena observed in a simple cantilever plate, Proceedings of ASME 2003 International Design Engineering Technical Conferences and Computer and Information in Engineering Conference, pp. 2603-2610, (2008)

[9]

VAKAKIS A F, EWINS D J., Effects of weak non-linearities on modal analysis, Mechanical Systems and Signal Processing, 8, 2, pp. 175-198, (1994)

[10]

CHATTERJEE A, VYAS N S., Stiffness non-linearity classification through structured response component analysis using Volterra series, Mechanical Systems and Signal Processing, 15, 2, pp. 323-336, (2001)

← 1 2 3 →