Gas permeation and mechanical properties of polypropylene nanocomposites with thermally-stable imidazolium modified clay

被引：0

作者：

Mittal, V. ^{[1
]}

机构：

[1] Department of Chemistry and Applied Biosciences, Institute of Chemical and Bioengineering, ETH Zurich, 8093 Zurich, Switzerland

来源：

European Polymer Journal | 2007年 / 43卷 / 09期

关键词：

Dialkyl imidazolium salt with better thermal stability than the commonly used dimethyldioctadecyl ammonium salt was synthesized and ion exchanged on the montmorillonite surface. Polypropylene nanocomposites with different volume fractions of the obtained organo-montmorillonite (OMMT) were prepared and the effect of the modified clay on the gas barrier and mechanical properties was studied. Wide angle X-ray diffraction (WAXRD) and transmission electron microscopy (TEM) were used to investigate the microstructure obtained. Thermal behavior of the composites analyzed by thermogravimetric analysis was observed to enhance significantly with the filler volume fraction. The gas permeation through the nanocomposite films markedly decreased with augmenting the filler volume fraction. The decrease in the gas permeation was even more significant than through the composites with ammonium treated montmorillonite. Better thermal behavior of the organic modification owing to the delayed onset of degradation hindered the interface degradation along with detrimental side reactions with polymer itself. Transmission electron microscopic studies indicated the presence of mixed morphology i.e; single layers and the tactoids of varying thicknesses in the composites. The crystallization behavior of polypropylene remained unaffected with OMMT addition. A linear increase in the tensile modulus was observed with filler volume fraction owing to partial exfoliation of the clay. © 2007 Elsevier Ltd. All rights reserved;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

页码：3727 / 3736

共 50 条

[11] Properties of polypropylene clay nanocomposites modified with difunctional compounds
Leuteritz, A
Pospiech, D
Kretzschmar, B
Willeke, M
Jehnichen, D
Jentzsch, U
Janke, A
COMPOSITE INTERFACES, 2005, 12 (3-4) : 231 - 242
[12] Thermally-Stable Imidazolium Dicationic Ionic Liquids with Pyridine Functional Groups
Clarke, Coby J.
Bui-Le, Liem
Hallett, Jason P.
Licence, Peter
ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 2020, 8 (23): : 8762 - 8772
[13] Investigation of thermal, mechanical and gas barrier properties of polypropylene-modified clay nanocomposites by micro-compounding process
Bunekar, Naveen
Tsai, Tsung-Yen
Huang, Je-Yu
Chen, Si-Jing
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS, 2018, 88 : 252 - 260
[14] SYNTHESIS OF PAN/CLAY NANOCOMPOSITES: STUDY OF GAS PERMEATION PROPERTIES
Patra, Subrata K.
Prusty, Gyanaranjan
Swain, Sarat K.
INTERNATIONAL JOURNAL OF NANOSCIENCE, 2011, 10 (4-5) : 1101 - 1105
[15] Effect of modified clay on mechanical and morphological properties of ethylene octane copolymer-polypropylene nanocomposites
Sharma, S. K.
Nema, Ajay K.
Nayak, S. K.
JOURNAL OF COMPOSITE MATERIALS, 2012, 46 (10) : 1139 - 1150
[16] Thermal Properties of Polypropylene/Ionic Liquid Modified Clay Nanocomposites
Wang, L. M.
ASIAN JOURNAL OF CHEMISTRY, 2011, 23 (09) : 4199 - 4201
[17] Structure and Mechanical Properties of Nanocomposites Based on Polypropylene - Clay Hybrids
Strat, Georgeta
Lihtetchi, Ioan
Strat, Mihail
Gurlui, Silviu
MATERIALE PLASTICE, 2009, 46 (04) : 435 - 438
[18] Effects of incorporation of VLDPE on the mechanical properties of polypropylene/clay nanocomposites
Shim, Jae Hun
Joo, Jung Hiuk
Choi, Jae Hoon
Yoo, Kwang Sik
Yoon, Jin-San
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2007, 234
[19] Factors controlling mechanical properties of clay mineral/polypropylene nanocomposites
Oya, A
Kurokawa, Y
Yasuda, H
JOURNAL OF MATERIALS SCIENCE, 2000, 35 (05) : 1045 - 1050
[20] Factors controlling mechanical properties of clay mineral/polypropylene nanocomposites
A. Oya
Y. Kurokawa
H. Yasuda
Journal of Materials Science, 2000, 35 : 1045 - 1050

← 1 2 3 4 5 →