Fabrication of a functionally graded TiNi shape memory alloy wire by powder metallurgy and plastic working (1st report, fabrication of a TiNi shape memory alloy billet and its phase transformation properties)

被引：0

作者：

Matsui, Ryosuke ^{[1
]}

Kyogoku, Hideki ^{[1
]}

Yoshida, Fusahito ^{[1
]}

机构：

[1] Department of Mechanical System Engineering, Hiroshima University, Higashi-Hiroshima-shi, Hiroshima, 739-8527

来源：

Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A | 2008年 / 74卷 / 10期

关键词：

Functionally graded materials; Phase transformation; Powder metallurgy; Shape memory alloy; Sintered materials;

D O I：

10.1299/kikaia.74.1336

中图分类号：

学科分类号：

摘要：

The martensitic and the reverse transformation temperatures are directly related to the bending rigidity of the TiNi shape memory alloy (SMA) wire. In this paper, aiming at obtaining a functionally graded TiNi shape memory alloy wire that varies in bending rigidity from high to low along the wire axis, a new fabrication process of combined powder metallurgy and plastic working is proposed. First, a multi-layered TiNi green compact, where Ti-Ni compositions varied layer by layer, was sintered by means of pulse current pressure sintering technique, and then it was hot-extruded and cold drawn into a wire. In this paper, as a first step of fabrication of a wire, we investigated transformation properties and texture morphologies of sintered and solution treated compacts. From differential scanning calorimetry and X-ray diffraction measurements, it was found that in this process the solution treatment of the billet plays an important role to induce the transformation temperature gradient in the sintered compact, since it greatly activates the interdiffusion between Ti and Ni particles.

引用

页码：1336 / 1341

页数：5

共 13 条

[1]

Shape Memory Alloys, (1987)

[2]

Otsuka K., Et al., Physical Metallurgy of Ti-Ni-based Shape Memory Alloy, Prog. Mater. Sci, 50, pp. 511-678, (2005)

[3]

Li Z., Et al., Effects of ECAE Process on Microstructure and Transformation Behavior of TiNi Shape Memory Alloy, Mater. Design, 27, pp. 324-328, (2006)

[4]

Morgan N.B., Medical shape memory alloy applications, Mat. Sci. Eng A, 378, pp. 16-23, (2004)

[5]

Ryklina E.P., Et al., The Nickel-Titanium Device with SME for Emergency Interruption of Blood Flow, Mat. Sci. Eng. A, 378, pp. 519-522, (2004)

[6]

Denise B., Et al., Easy Assessment of the Biocompatibility of Ni-Ti Alloys by in vitro Cell Culture Experiments on a Functionally Graded Ni-NiTi-Ti Material, Biomaterials, 23, pp. 4549-4555, (2002)

[7]

Furuichi Y., Et al., Fatigue Properties of a TiNi Shape-Memory Alloy Wire in Bending, Trans. MRS-J, 28, 3, pp. 615-618, (2003)

[8]

Matsui R., Et al., Fatigue Properties of Highelastic Thin Wire and Superelastic Thin Tube of NiTi Alloy, Trans. MRS-J, 29, 7, pp. 3053-3056, (2004)

[9]

Matsui R., Et al., Tensile Deformation and Rotating-Bending Fatigue Properties of a Highelastic Thin Wire, a Superelastic Thin Wire, and a Superelastic Thin Tube of NiTi Alloys, J. Eng. Mater. Tech. ASME, 126, pp. 384-391, (2004)

[10]

Tobushi H., Et al., Deformation and Fatigue Properties of Highelastic Thin Wire and Superelastic Thin Tube of NiTi Alloy, Trans. J. Soc. Mech. Eng. A, 70, 689, pp. 76-83, (2004)

← 1 2 →