White layers generated in AISI O1 tool steel by hard turning or by EDM

被引：2
作者：
Fundacion TEKNIKER-IK4, Avda. Otaola 20, Guipuzcoa 20600, Spain [1 ]
不详 [2 ]
不详 [3 ]
机构：
[1] Fundacion TEKNIKER-IK4, Guipuzcoa 20600
[2] IDEKO S. Coop., Elgoibar 20870 Guipúzcoa
[3] CEIT, Tecnun, University of Navarra, San Sebastián 20018
来源：
Int. J. Mach. Mach. Mater. | 2008年 / 4卷 / 287-301期
关键词：
EDM; Electro-Discharge Machining; Hard turning; Machining; Residual stresses; Surface integrity; Tool steel; White Layers; WL;
D O I：
10.1504/IJMMM.2008.023714
中图分类号：
学科分类号：
摘要：
The structure and origin of White Layers (WL) induced by hard turning and by Electro-Discharge Machining (EDM) have been studied and compared. The WL induced by turning is particularly important when the tool is worn. It is associated with tensile residual stresses, increased hardness and larger amount of retained austenite. Transmission Electron Microscope (TEM) reveals that its structure is nanocrystalline and very different from the tempered martensitic structure of the substrate. The very high plastic strains and plastic gradients measured beyond the WL (that grow exponentially as free surface is approached) justify the conclusion that Severe Plastic Deformation (SPD) is at the origin of this nanocrystalline WL associated with hard turning, without recourse to any phase transformation. In contrast, the WL induced by EDM shows typical signs of thermal origin below a thin melted and resolidified layer, signs of austenitising, quenching and auto-tempering are clearly found. Copyright © 2008, Inderscience Publishers.
引用
收藏
页码：287 / 301
页数：14
相关论文
共 33 条
  • [1] Akcan S., Shah S., Moylan S.P., Chhabra P.N., Chandrasekar S., Yang H.T.Y., Formation of white layers in steels by machining and their characteristics, Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 33, 4, pp. 1245-1254, (2002)
  • [2] Barbacki A., Kawalec M., Hamrol A., Turning and grinding as a source of microstructural changes in the surface layer of hardened steel, Journal of Materials Processing Technology, 133, 1-2, pp. 21-25, (2003)
  • [3] Barry J., Byrne G., TEM study on the surface white layer in two turned hardened steels, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 325, 1-2, pp. 356-364, (2002)
  • [4] Bosheh S.S., Mativenga P.T., White layer formation in hard turning of H13 tool steel at high cutting speeds using CBN tooling, International Journal of Machine Tools and Manufacture, 46, 2, pp. 225-233, (2006)
  • [5] Chou Y.K., Evans C.J., White layers and thermal modeling of hard turned surfaces, International Journal of Machine Tools and Manufacture, 39, 12, pp. 1863-1881, (1999)
  • [6] Christenson A.L., Koistinen D.P., Marburger R.E., Semchyshen M., Evans W.P., The measurement of stress by X-ray, (1960)
  • [7] Cusanelli G., Hessler-Wyser A., Bobard F., Demellayer R., Perez R., Flukiger R., Microstructure at submicron scale of the white layer produced by EDM technique, Journal of Materials Processing Technology, 149, 1-3, pp. 289-295, (2004)
  • [8] Garcia Navas V., Garcia-Rosales C., Gil Sevillano J., Maranon J.A., Ferreres I., Optimización de procesos de mecanizado mediante control de tensiones residuales, XV Congreso de Máquinas-Herramienta y Tecnologías de Fabricación, (2004)
  • [9] Garcia V., Ordas N., Penalva M.L., Fernandez J., Ostolaza K., Garcia-Rosales C., Evaluation of the residual stresses generated by different types of machining using X-ray diffraction, Boletin De La Sociedad Española De Ceramica Y Vidrio, 43, 2, pp. 251-254, (2004)
  • [10] Garcia-Navas V., Ferreres I., Maranon J.A., Garcia-Rosales C., Gil-Sevillano J., Residual stresses generated in F-522 steel by different machining processes, Revista De Metalurgia, 41, 4, pp. 266-279, (2005)
1234