Design and machining of the epicycloid planet gear of cycloid drives

被引：0
|
作者：
Lai, Ta-Shi [1 ]
机构：
[1] Department of Vehicle Engineering, National Huwei University of Science and Technology, Huwei, Yuenlin 63208, Taiwan
来源：
International Journal of Advanced Manufacturing Technology | 2006年 / 28卷 / 7-8期
关键词：
This paper presents a mathematical model and design procedures to design the epicycloid planet gear of cycloid drives. It is based on coordinate transformation; envelope theory; and theories of conjugate surfaces; from which the equation of meshing is derived; while the path of machining tools is obtained by the equidistant curve principle. In addition; a program is developed to solve the equations of meshing and conjugate surfaces. Therefore; the epicycloid-profile is obtained. Then; these data are used to construct the 2D drawing and solid modeling of the epicycloid-planet-gear using AutoCAD and Pro/E (a CAD software package); respectively. The CAD data is used for machining; in this case by a wire-cutting machine. The manufactured component is presented to demonstrate that the design procedures and manufacturing are feasible. The design approach and machining method are suitable for applying CAD and CAM in industrial fields;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：665 / 670
相关论文
共 50 条
  • [21] Force simulation of cycloid gear of horizontal three-gear cycloid reducer
    Sun, Yingshi
    Guan, Tianmin
    Zhang, Shulian
    MECHANICAL, MATERIALS AND MANUFACTURING ENGINEERING, PTS 1-3, 2011, 66-68 : 1993 - +
  • [22] Design of Cycloid Planetary Gear Drives with Tooth Number Difference of Two A Comparative Study on Contact Characteristics and Load Analysis
    Tsai, S. -J.
    Chang, L. -C.
    Huang, C. -H.
    INTERNATIONAL CONFERENCE ON GEARS 2017/ INTERNATIONAL CONFERENCE ON GEAR PRODUCTION/ INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE PLASTIC GEARS 2017, VOLS 1 AND 2, 2017, 2294 (1-2): : 61 - 73
  • [23] Design of a Novel Cycloid Drive with a Cycloid-arc Gear and Analysis of Its Meshing Characteristic
    Liu, Jingya
    Chen, Bingkui
    Matsumura, Shigeki
    Li, Chaoyang
    Houjoh, Haruo
    JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2012, 6 (02): : 310 - 322
  • [24] Design of cycloid planetary gear drives with tooth number difference of twoA comparative study on contact characteristics and load analysis
    Shyi-Jeng Tsai
    Ling-Chiao Chang
    Ching-Hao Huang
    Forschung im Ingenieurwesen, 2017, 81 : 325 - 336
  • [25] Design of Gear Drives.
    Salje, E.
    Meyer, B.
    Seitz, W.
    TZ fur Metallbearbeitung, 1979, 73 (11): : 29 - 32
  • [26] Experimental Studies on Torsional Stiffness of Cycloid Gear Based on Machining Parameters of Tooth Surfaces
    Zhifeng Liu
    Tao Zhang
    Yida Wang
    Congbin Yang
    Yongsheng Zhao
    International Journal of Precision Engineering and Manufacturing, 2019, 20 : 1017 - 1025
  • [27] Experimental Studies on Torsional Stiffness of Cycloid Gear Based on Machining Parameters of Tooth Surfaces
    Liu, Zhifeng
    Zhang, Tao
    Wang, Yida
    Yang, Congbin
    Zhao, Yongsheng
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2019, 20 (06) : 1017 - 1025
  • [28] Principle and design of noncircular pin-cycloid gear transmission
    Lin, Chao
    Wang, Yan-Tao
    Dongbei Daxue Xuebao/Journal of Northeastern University, 2014, 35 (08): : 1190 - 1194
  • [29] The Cycloid Permanent Magnetic Gear
    Jorgensen, Frank T.
    Andersen, Torben Ole
    Rasmussen, Peter Omand
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2008, 44 (06) : 1659 - 1665
  • [30] The cycloid permanent magnetic gear
    Joergensen, F. T.
    Andersen, T. O.
    Rasmussen, P. O.
    CONFERENCE RECORD OF THE 2006 IEEE INDUSTRY APPLICATIONS CONFERENCE, FORTY-FIRST IAS ANNUAL MEETING, VOL 1-5, 2006, : 373 - 378
12345