Tensile tests and strength estimation for double-lap single-bolt joints in T800 carbon fiber reinforced composites

被引：0
作者：
He B. [1 ]
Ge D. [1 ]
Mo Y. [1 ]
Du X. [1 ]
机构：
[1] School of Aerospace Engineering, Tsinghua University, Beijing
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2016年 / 33卷 / 07期
关键词：
Bolted joints; Engineering approach; Preliminary design; Stress concentration relief factor; T800 carbon fiber reinforced composites;
D O I：
10.13801/j.cnki.fhclxb.20151020.002
中图分类号：
学科分类号：
摘要：
In order to investigate the mechanical properties of bolted joints in T800 carbon fiber reinforced composites systematically, in-plane quasi-static tensile tests were carried out on double-lap single-bolt joints in T800 carbon fiber reinforced composites firstly, and the effects of ply ratio, ply sequence, bolt diameter and curing method on stiffness and 2% offset bearing strength of composite bolted joints were discussed. Then, based on test results, stress concentration relief factors for bolted joints in T800 carbon fiber reinforced composites were obtained. Finally, combining the stress concentration relief factor and tensile strength of un-notched laminates with the corresponding plies, an engineering approach for the ultimate bearing strength of composite bolted joints was established. The results show that when bolt fractures, the ultimate bearing strength of joints is decided by the shear strength of bolt and the bolt diameter/laminate thickness ratio. Joints have two collapse modes concluding bearing and shear, and they are related with the ±45° ply ratio. The calculated results of engineering approach agree well with the test results. The test results and engineering approach obtained can provide theoretical proofs and technological supports for the preliminary design of T800 carbon fiber reinforced composite bolted joints. © 2016, BUAA Culture Media Group Ltd. All right reserved.
引用
收藏
页码：1540 / 1552
页数：12
相关论文
共 17 条
  • [1] Xiao Y., Ishikawa T., Bearing strength and failure behavior of bolted composite joints, part I: Experimental investigation, Composites Science and Technology, 65, 7, pp. 1032-1043, (2005)
  • [2] Dhoe J.X., Comer A.J., Stanley W.F., Et al., Study of the effect of liquid shim on single-lap joint using 3D Digital Image Correlation, Composite Structures, 96, pp. 216-225, (2013)
  • [3] Warren K.C., Lopez-Anido R.A., Goering J., Behavior of three-dimensional woven carbon composites in single-bolt bearing, Composite Structures, 127, pp. 175-184, (2015)
  • [4] Qin T.L., Zhao L.B., Zhang J.Y., Fastener effects on mechanical behaviors of double-lap composite joints, Composite Structures, 100, pp. 413-423, (2013)
  • [5] Zhang J.Y., Liu F.R., Zhao L.B., Et al., A novel characteristic curve for failure prediction of multi-bolt composite joints, Composite Structures, 108, pp. 129-136, (2014)
  • [6] Wang Z.Q., Zhou S., Zhang J.F., Et al., Progressive failure analysis of bolted single-lap composite joint based on extended finite element method, Materials and Design, 37, pp. 582-588, (2012)
  • [7] Hart-Smith L.J., Bolted joints in graphite composites: NASA-TR-144899, (1976)
  • [8] Xie M.J., Joints for Composite Materials, pp. 179-188, (2011)
  • [9] Yang X.K., Zheng X.T., Cheng L.N., Et al., An engineering approach to predict the bearing strength of single-bolted double-lapped joints in composite laminate, Acta Materiae Compositae Sinica, 29, 6, pp. 225-229, (2012)
  • [10] Thoppul S., Finegan J., Gibson R., Mechanics of mechanically fastened joints in polymer-matrix composite structures-A review, Composites Science and Technology, 69, 3, pp. 301-329, (2009)
12