Finite element analysis on mechanical properties of castor-capsule

被引：1

作者：

Cao Y. ^{[1
]}

Li C. ^{[1
]}

Qing Y. ^{[1
]}

Kong D. ^{[1
]}

机构：

[1] Engineering College, South China Agricultural University, Guangzhou

来源：

Jiangsu Daxue Xuebao (Ziran Kexue Ban)/Journal of Jiangsu University (Natural Science Edition) | 2010年 / 31卷 / 04期

关键词：

Castor-capsule; Finite element analysis; Mechanical properties; Model;

D O I：

10.3969/j.issn.1671-7775.2010.04.003

中图分类号：

O24 [计算数学];

学科分类号：

070102 ;

摘要：

The Zi castor 5 was selected as sample study, the size of the section of capsule was measured, and the shape of section and the character of structure were described. The stress distribution from top and middle of castor-capsule under pressing loads by finite element method was analysed. The geometric model and finite element model with the measured results for castor-capsule were established. The results show that the rupture of castor-capsule shell is mainly caused by maximum tensile stress. The position of maximum tensile stress is at middle raphe of the top of castor-capsule when top pressing loads were applied, and the inside of the middle peel cracked due to tensile stress. The position of maximum tensile stress is at two ends of middle raphe of middle peel when middle pressing loads were applied, the inside of four perigon of middle peel near the line cracks due to tensile stress.

引用

页码：383 / 387

页数：4

共 10 条

[1]

Cao Y., Li C., Qing Y., Et al., Test on mechenic characteristic of castor capsule hulling, Journal of Jiangsu University: Natural Science Edition, 30, 5, pp. 446-449, (2009)

[2]

Claasen C.E., Hoffman A., The inheritance of the pistillate character in castor and its possible utilization in the production of commercial hybridseed, Agron J, 42, pp. 79-82, (1950)

[3]

Castor bean threshing and cleaning-by breaking ripe pods into fragments, and shelling these in at least two fraction

[4]

Bortnikov A.I., Rasporov A.R., Savin A.D., Castor bean plant harvester

[5]

Wang X., Wang M., Experiment on mechanical properties of the seed nucleus of gink go biloba, Transactions of the Chinese Society for Agricultural Machinery, 39, 8, pp. 57-61, (2008)

[6]

(1994)

[7]

Tirupathi R., Chandrupatla Ashok D., Belegundu, (2006)

[8]

Li X., Gao L., Ma F., Analysis of finite element method on mechanical properties of corn seed, Transactions of the Chinese Society for Agricultural Machinery, 38, 10, (2007)

[9]

Zhu L., Song Y., Liu Q., Et al., Mathematic model of seed peeling efficiency with critical structure parameters based on orthogonal multinomial tests, Transactions of the CSAE, 19, 5, pp. 22-26, (2003)

[10]

Wang R., Jiao Q., Wei D., Et al., Mechanical characteristics and the finite element analysis of grapes, Transactions of the CSAE, 21, 2, pp. 7-10, (2005)

← 1 →