Investigation of draw-trimming springback of laser tailor-welded blanks

被引：1

作者：

Jiang, Yinfang ^{[1
]}

Ding, Xinli ^{[1
]}

Yuan, Guoding ^{[1
]}

Wang, Youhua ^{[1
]}

机构：

[1] School of Mechanical Engineering, Jiangsu University

来源：

Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering | 2008年 / 44卷 / 12期

关键词：

Draw-bending; Draw-trimming; Springback; Tailor-welded blanks;

D O I：

10.3901/JME.2008.12.203

中图分类号：

学科分类号：

摘要：

By the numerical simulation and experiments, the process analysis of draw-bending and draw-trimming of the tailor-welded blanks (TWBs) with the thickness ratio 1.2 mm/0.8 mm are made, in which the effect of the blank holder force (BHF), friction factor and die profile radius, etc. on the springback are mainly investigated. The TWBs' springback angle in the corner of punch and die, the total springback angle and the sidewall curvature are surveyed in draw-bending and draw-trimming. And the welded line movement, the stress distribution in TWBs forming and their interact relationship are analyzed. The TWBs' springback in draw-bending and draw-trimming are badly influenced by the BHF, friction factor, die profile radius etc., in which the BHF is the key factor; there is an intimate relationship between TWBs' draw-bending springback/draw-trimming springback and welded-line movement, by which it will be advantageous to reduce the TWBs' springback through controlling the welded-line movement. In comparison, the TWBs' draw-trimming springback is smaller than the TWBs' draw-bending springback, so it is better to use draw-trimming process for controlling TWBs' springback and improving the shape precision of TWBs' forming.

引用

页码：203 / 207

页数：4

共 11 条

[1]

Jiang Y., Yang J., Chen W., The status quo and trends of tailor welded blanks, Automotive Engineering, 25, 4, pp. 410-414, (2003)

[2]

Trem R., The future of automating: Tailor welded blanks, Welding Design and Fabrication, 77, 2, pp. 37-40, (2004)

[3]

Chan L.C., Cheng C.H., Chan S.M., Et al., Formability analysis of tailor-welded blanks of different thickness ratios, Journal of Manufacturing Science and Engineering, 127, 4, pp. 743-751, (2005)

[4]

Jiang Y., Yang J., Study on the characteristic of springback in U-channel forming of tailor welded blanks, The 11th International Manufacturing Conference, (2004)

[5]

Jiang Y., Wu L., Yuan G., Et al., Theoretical analysis of the springback in bending of tailor welded blanks with elastic-perfectly plastic material, ICRM'2005, pp. 995-1000, (2005)

[6]

Sung H.C., Jang M.S., Young M.H., Et al., Springback characteristics of the tailor-welded strips in U-bending, Journal of Materials Processing Technology, 130-131, pp. 14-19, (2002)

[7]

Sung H.C., Young M.H., Dae G.S., Springback characteristics of the tailor-welded strips in U-draw bending, NUMISHEET'2002, pp. 183-187, (2002)

[8]

Xiao Z., Numerical prediction of springback in U-channel forming of aluminum tailor welded blanks, (1999)

[9]

Jiang Y., Zhu Y., Yang J., Investigation of forming of tailor welded blanks and the mechanism of weld line movement, Journal of Plasticity Engineering, 12, SUPPL., pp. 123-128, (2005)

[10]

Jiang Y., Zhu Y., Yang J., An investigation into the springback characteristic in bending forming of tailor-welded blanks, Automotive Engineering, 5, pp. 631-633, (2005)

← 1 2 →