Multiple welding simulated microstructure and corrosion resistance of super austenitic stainless steel 254SMo welding heat affected zone

被引：1

作者：

Fan G. ^{[1
]}

Liu J. ^{[2
]}

Zhang G. ^{[2
]}

Li Y. ^{[2
]}

Luo G. ^{[1
]}

Lian X. ^{[1
]}

Li G. ^{[1
]}

机构：

[1] Taiyuan Iron and Steel Group Co. Ltd., Taiyuan

[2] College of Materials Science and Engineering, Taiyuan University of Science and Technology, Taiyuan

来源：

International Journal of Computational Materials Science and Surface Engineering | 2020年 / 9卷 / 01期

关键词：

Corrosion resistance; Heat inputs; Precipitated phase; Simulated heat-affected zone; Super austenitic stainless steel; Thermal cycles;

D O I：

10.1504/IJCMSSE.2020.107397

中图分类号：

学科分类号：

摘要：

This paper studies the effects of thermal cycle and heat input on microstructure, grain size, precipitated phase and corrosion properties in the simulated heat-affected zone of super austenitic stainless steel 254SMo. The results show that the microstructure grains in the heat affected zone gradually grow up, the pitting corrosion resistance decreases continuously and intergranular corrosion resistance firstly decreases and then increases with the thermal cycle and heat input increase. The precipitated phase appears in the heat-affected zone at the multiple thermal cycles and high heat input. © 2020 Inderscience Enterprises Ltd.

引用

页码：38 / 52

页数：14

共 18 条

[11] Mateo A., Llanes L., Anglada M., Et al., Characterization of the intermetallic G-phase in an AISI 329 duplex stainless steel, Journal of Materials Science, 32, 17, pp. 4533-4540, (1997)
[12] Moon J., Ha H.Y., Lee T.H., Corrosion behavior in high heat input welded heat-affected zone of Ni-free high-nitrogen Fe-18Cr-10Mn-N austenitic stainless steel, Materials Characterization, 82, 5, pp. 113-119, (2013)
[13] Oldfield J.W., Todd B., Technical and economic aspects of stainless steels in MSF desalination plants, Desalination, 124, 1-2, pp. 75-84, (1999)
[14] Ren J., Song Z., Zheng W., Et al., Effects of solution treatment temperature on microstructure and mechanical properties of 254Mo, Hot Working Technology, 41, 12, pp. 173-176, (2012)
[15] Schutze M., Roche M., Bender R., Corrosion Resistance of Steels, Nickel Alloys, and Zinc in Aqueous Media: Waste Water, Seawater, Drinking Water, High-Purity Water, (2015)
[16] Shin J.K., Jang H.J., Cho K.W., Et al., Effects of sigma and chi ohases on the localized corrosion resistance of SR50A super austenitic stainless steel, Corrosion, 69, 4, pp. 364-371, (2013)
[17] Woollin P., Kostrivas A., Woollin P., Et al., Use of supermartensitic stainless steel pipe for offshore flowline applications, 25th International Conference on Offshore Mechanics and Arctic Engineering, pp. 565-572, (2006)
[18] Xu M.Z., Mechanical behavior and microstructure stability of high nitrogen austenitic stainless steel, Journal of Wuhan University of Technology, (2011)

← 1 2 →