A real-time NURBS motion interpolator for position control of a slide equilateral triangle parallel manipulator

被引：0

作者：

Chuang, Hua-Yi ^{[1
]}

Chien, Kuo-Hua ^{[1
]}

机构：

[1] Department of Mechanical Engineering, National Taiwan University of Science and Technology, 43, Keelung Road, Sec. 4, Taipei, 106, Taiwan

来源：

International Journal of Advanced Manufacturing Technology | 2007年 / 34卷 / 7-8期

关键词：

This study presents a real-time non-uniform rational B-spline (NURBS) motion interpolator command generation for position control of a new design to achieve a six-degree-of-freedom (6dof) slide equilateral triangle parallel manipulator (SETPM). The existing method utilizes the approximate method to obtain the characteristics of curves of the velocity and acceleration for the feed-forward compensation in the joint space. However; the NURBS motion interpolator command generation is related to the geometric characteristics of curves including position; tangent; and curvature to the motion dynamics of the SETPM including position; velocity and acceleration for applied directly the feed-forward compensation in the global space. The inverse dynamics controller (IDC) is the power of control law. However; implementing the inverse dynamics control laws requires accurately knowing the system dynamic model parameters and computing the complete equations of motion in real time. To reduce the time for calculating the inverse dynamic; this study proposes a feed-forward compensation with feedback proportional derivate (PD) control to take the place of inverse dynamics control for reducing both the inverse dynamic calculation time and the tracking error. The proposed real-time NURBS motion interpolator command generation and feed-forward compensation with feedback PD control are also successfully applied to a slide equilateral triangle parallel manipulator on a PC-based system to achieve high motion precision. © 2006 Springer-Verlag London Limited;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

页码：724 / 735

共 50 条

[31] Real-time variable feed rate NURBS curve interpolator for CNC machining
Cheng, CW
Tsai, MC
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2004, 23 (11-12): : 865 - 873
[32] A real-time configurable NURBS interpolator with bounded acceleration, jerk and chord error
Annoni, Massimiliano
Bardine, Alessandro
Campanelli, Stefano
Foglia, Pierfrancesco
Prete, Cosimo Antonio
COMPUTER-AIDED DESIGN, 2012, 44 (06) : 509 - 521
[33] Real-time variable feed rate NURBS curve interpolator for CNC machining
C.-W. Cheng
M.-C. Tsai
The International Journal of Advanced Manufacturing Technology, 2004, 23 : 865 - 873
[34] Development of a real-time interpolator for NURBS based on multi-DSPs system
Liu, N.
2006 1ST IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS, VOLS 1-3, 2006, : 1022 - 1027
[35] A real-time NURBS surface interpolator for 5-axis surface machining
Wang, Yong-Zhang
Chen, Liang-Ji
Chinese Journal of Aeronautics, 2005, 18 (03): : 263 - 272
[36] Development of a real-time interpolator for NURBS based on Multi-DSPs system
Liu, N.
ICIEA 2006: 1ST IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS, VOLS 1-3, PROCEEDINGS, 2006, : 590 - 595
[37] Real-time motion planning for the macro-micro parallel manipulator system
Duan, XueChao
Qiu, Yuanying
Du, Jingli
Zhao, Ze
Duan, Qingjuan
2011 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION (ICRA), 2011,
[38] Real-time NURBS interpolation using FPGA for high speed motion control
Yau, Hong-Tzong
Lin, Ming-Tzong
Tsai, Meng-Shiun
COMPUTER-AIDED DESIGN, 2006, 38 (10) : 1123 - 1133
[39] Curvature-Based Real-Time NURBS Surface Interpolator with Look-Ahead ACC/DEC Control
Wang, Yongqing
Liu, Haibo
Yu, Sennan
MATHEMATICS IN COMPUTER SCIENCE, 2012, 6 (03) : 315 - 326
[40] A real-time NURBS surface interpolator for precision three-axis CNC machining
Tsai, MC
Cheng, CW
Cheng, MY
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2003, 43 (12): : 1217 - 1227

← 1 2 3 4 5 →