Preparation and Heat Aging Property of Phase Change Thermal Interface Materials

被引：0

作者：

Wan W. ^{[1
]}

Zou H. ^{[1
]}

Chen T. ^{[1
]}

Wang H. ^{[1
]}

机构：

[1] Shenzhen Darbond Interface Material Co., Ltd, Shenzhen

来源：

Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering | 2020年 / 36卷 / 04期

关键词：

Aluminum oxide; Heat aging; Hot melt adhesive; Thermal conduction;

D O I：

10.16865/j.cnki.1000-7555.2020.0084

中图分类号：

学科分类号：

摘要：

Phase change thermal interface materials were prepared with aluminum oxide (as thermal conductive agent) and hot melt adhesive (as binding agent). The effects of different resins, tackifying resin and plasticizers on the thermal properties after heat aging were studied by thermal conductivity meter and thermal resistance meter. A better formula is as following: EVA, petroleum resin (5380) and pentaerythrite oleate (PETO). In this formula, the phase change thermal interface material has good thermal and anti-aging properties. Thermal conductivity is 4.1W/(m•K) and thermal resistance is 0.09℃•cm2/W. Moreover, after 480 h aging at 125℃, the increase rate of thermal resistance is as low as 25%. © 2020, Editorial Board of Polymer Materials Science & Engineering. All right reserved.

引用

页码：161 / 166and176

共 13 条

[1]

Bar-Cohen A., Thermal frontiers in the design and packaging of microelectronic, Equipment Mechanical Engineering, 105, pp. 53-59, (1983)

[2]

Yeh L.T., Review of heat transfer technologies in electronicequipment, Journal of Electronic Packaging, 117, pp. 333-339, (1995)

[3]

Fang L., Wu C., Qian R., Et al., Nano-micro structure offunctionalized boron nitride and aluminum for epoxy composites with enhanced thermal conductivity and breakdown strength, RSC Advances, 4, pp. 21010-21017, (2014)

[4]

Hong J.P., Yoon S.W., Hwang T., Et al., High thermal conductivityepoxy composites with bimodal distribution of aluminum nitride and boron nitride fillers, Thermochimica Acta, 537, pp. 70-75, (2012)

[5]

Ishida H., Rimdusit S., Very high thermal conductivity obtained by boron nitride-filled polybenzoxazine, Thermochimica Acta, 320, pp. 177-186, (1998)

[6]

Zhu H., Li Y., Fang Z., Et al., Highly thermally conductive papers with percolative layered boron nitride nanosheets, ACS Nano, 8, pp. 3606-3613, (2014)

[7]

Mehling H., Latent heat storage with a PCM-graphite composite material: experimental results from the first test stor, (2000)

[8]

Li W.W., Study on high thermal conductive phase change materials and thermal control, (2017)

[9]

Shao W.L., Study on surface stickiness of thermal silicone pads, (2014)

[10]

Wang M., Qin Z.F., Aging mechanism of polymer materials and its control, Chemical Engineering Design Communications, 43, 1, pp. 46-47, (2017)

← 1 2 →