Effect of heat treatment on the microstructure and properties of Ti-8Al-1Mo-1V alloy with carbon addition

被引：2

作者：

Szkliniarz, Agnieszka ^{[1
]}

机构：

[1] Silesian University of Technology, ul. Krasińskiego 8, Katowice

来源：

Solid State Phenomena | 2015年 / 229卷

关键词：

Heat treatment; Material properties; Microstructure; Titanium alloys with carbon;

D O I：

10.4028/www.scientific.net/SSP.229.131

中图分类号：

学科分类号：

摘要：

The paper concerns a new group of titanium alloys with improved properties caused by presence of carbon. The effect of heat treatment processes like annealing, solution treatment and precipitation hardening on the microstructure of Ti-8Al-1Mo-1V alloy with carbon content not exceeding the limit of solubility of carbon in the alpha phase (0.2 wt. %) were presented. The result of hardness test, static tensile test and creep test of research alloy in both annealing and hardening state was showed. The obtained results were referred to the same alloy without carbon. Investigated alloy is characterized by improved tensile strength with comparable plastic properties. The investigated alloy was characterized better creep resistance after duplex annealing treatment than after hardening. © (2015) Trans Tech Publications, Switzerland.

引用

页码：131 / 136

页数：5

共 13 条

[1]

Fundamentals and Applications, (2003)

[2]

pp. 377-408, (1993)

[3]

Light Structural Alloys, pp. 238-245, (1995)

[4]

Wang H.G., Wang F., Song Y.P., Effect of heat treatment on microstructure and properties of Ti811 alloys, Appl. Mech. Mater, 117-119, pp. 1032-1035, (2012)

[5]

Solonina O.P., Ulyakova N.M., Effect of carbon on the mechanical properties and structure of titanium alloys, Materials Science and Heat Treatment, 4, pp. 310-312, (1974)

[6]

Ogden H.R., Jaffee R.I., The effects of carbon, oxygen, and nitrogen on the mechanical properties of titanium and titanium alloys, Titanium Metallurgical Laboratory Report No. 20, Ohio, pp. 1-101, (1955)

[7]

Grauman J., Fox S., Nyakana S., Titanium Alloy Having Improved Corrosion Resistance and Strength, (2001)

[8]

Chen Z.Q., Li Y.G., Loretto M.H., Wu X., Role of alloying elements in microstructures of beta titanium alloys with carbon additions, Mater. Sci. Tech, 10, pp. 1391-1398, (2003)

[9]

Chen Z.Q., Li Y.G., Hu D., Loretto M.H., Wu X., Effect of carbon additions on the microstructure and mechanical properties of Ti-15-3, J. Mater. Sci. Technol, 20, pp. 343-349, (2004)

[10]

Szkliniarz A., Szkliniarz W., Assessment quality of Ti alloys melted in induction furnace with ceramic crucible, Solid State Phenom, 176, pp. 139-148, (2011)

← 1 2 →