Life assessment in fretting fatigue

被引：1

作者：

Navarro, Carlos ^{[1
]}

Vázquez, Jesús ^{[1
]}

Domínguez, Jaime ^{[1
]}

机构：

[1] Escuela Técnica Superior de Ingeniería, Universidad de Sevilla, Camino de Los Descubrimientos Sn

来源：

Key Engineering Materials | 2014年 / 618卷

关键词：

Fatigue; Fatigue crack growth life; Fatigue life assessment; Fretting fatigue; Multiaxial fatigue;

D O I：

10.4028/www.scientific.net/KEM.618.99

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Fretting fatigue denotes the detrimental effect on a material arising from the cyclic sliding of two contacting surfaces with small relative displacements between them. One or both of the components in contact may be subject to bulk stresses caused by cyclic loads. The assessment of the fretting fatigue strength and life of any component is a complicated issue due to the many parameters affecting it, the complexity of the stress fields cyclic variation during fretting and the uncertainties associated to the contact conditions. This paper describes some singular aspects of fretting fatigue related to strength analysis and testing, presents a procedure developed by the authors during the last years to estimate the fretting fatigue strength and life and compares the assessment outcomes with the results of tests carried out by different authors. © (2014) Trans Tech Publications, Switzerland.

引用

页码：99 / 122

页数：23

共 48 条

[1]

Waterhouse R.B., Lindley T.C., Fretting Fatigue, (1994)

[2]

Hoeppner D.W., Chandrasekaran V., Elliot C.B., Fretting fatigue: Current technology and practices, ASTM STP 1367 (American Society for Testing and Materials, (2000)

[3]

Dobromirski J.M., Standardization of fretting fatigue test methods and equipment, ASTM STP 1159, (1992)

[4]

Eden E.M., Rose W.N., Cunningham F.L., Proc. of the Institution for Mechanical Engineers, 4, (1911)

[5]

Yamashita N., Mura T., Wear, 91, (1983)

[6]

Lamac V., Dubourg M.C., Vincent L., Tribology International, 30, (1997)

[7]

Antoniou R.A., Radtke T.C., Materials Science and Engineering, A237, (1997)

[8]

Ruiz C., Boddington P.H.B., Chen K.C., Experimental Mechanics, 24, (1984)

[9]

Zhou Z.R., Goudreau S., Fiset M., Cardou A., Wear, 181-183, (1995)

[10]

Sato K., Wear, 125, (1988)

← 1 2 3 4 5 →