FY-3A multi-detector radiometric calibration for infrared band of medium resolution spectral imager

被引：9

作者：

Hu X.-Q. ^{[1
,3
]}

Zhang L.-Y. ^{[1
]}

Zheng Z.-J. ^{[1
]}

Zhang Y. ^{[1
]}

Sun L. ^{[1
]}

Ding L. ^{[2
]}

Huang X.-X. ^{[2
]}

机构：

[1] Key Laboratory of Radiometric Calibration and Validation for Environmental Satellites, National Satellite Meteorological Center, China Meteorological Administration

[2] Shanghai Institute of Technological Physics, Chinese Academy of Sciences

[3] Institute of Remote Sensing Applications, Chinese Academy of Sciences

来源：

Guangxue Jingmi Gongcheng/Optics and Precision Engineering | 2010年 / 18卷 / 09期

关键词：

Infrared band; Medium resolution spectral imager (MERSI); Multi-detector calibration; Spectral difference compensation;

D O I：

10.3788/OPE.20101809.1972

中图分类号：

学科分类号：

摘要：

As the FY-3A Medium Resolution Spectral Imager(MERSI) takes a cross-track scanning by 40 detectors in a thermal Infrared Window band, its radiometric calibration is more complicate than those of traditional single detectors. Therefore, this paper investigates a multi-detector radiometric calibration method for the MERSI. Firstly, the operational calibration algorithm for the IR band of MERSI based on onboard blackbody detector-by-detector is proposed to eliminate the radiometric response difference strips. Then, based on the radiance ratios of each detector to reference detector at different blackbody temperatures, this algorithm conducts the normalization processing for SRF-different bias (spectral normalization) to alleviate the image strips by radiometric mechanism. To verify the accuracy of MERSI calibration, the inter-calibration between MERSI and Moderate-resolution Imaging Spectroradiometer(MODIS) is performed by using Simultaneous Nadir Observation (SNO). Experiments show that the difference of their brightness temperatures is about 1.0 K, which may come from their different bandwidths.

引用

页码：1972 / 1980

页数：8

共 10 条

[1] Yang J., Dong C.H., Lu N.M., Et al., FY-3A: The new generation polar-orbiting meteorological satellite of china, Acta Meteorological Sinica, 67, 4, pp. 501-509, (2009)
[2] Ding L., Flight model design of FY-3A medium resolution spectral imager (MERSI), (2005)
[3] Ding L., Flight model (Z01-2) development review of FY-3A medium resolution spectral imager (MERSI), (2007)
[4] Guenther B.W., Knight B.S., MODIS calibration: A brief review of the strategy for the at-Launch calibration approach, J. Atmos. Ocean. Tech., 13, pp. 274-285, (1996)
[5] Xiong J., Toller G., Chiang V., Et al., MODIS level 1B algorithm theoretical basis document, MODIS characterization support team, (2005)
[6] Guenther B., Godden G.D., Xiong X., Et al., Pre-launch algorithm and data format for the level 1 calibration products for the EOS AM-1 moderate resolution imaging spectroradiometer (MODIS), IEEE Trans. Geosci. Remote Sens., 36, pp. 1142-1151, (1998)
[7] Xiong X.K., Guenther C.B., Et al., MODIS thermal emissive bands calibration algorithm and on-orbit performance, SPIE, 4891, pp. 392-401, (2002)
[8] Xiong X.K., Guenther B.C., Et al., MODIS thermal emissive bands calibration algorithm and on-orbit performance, SPIE, 4891, pp. 392-401, (2002)
[9] Zhu X.X., Fan T.X., Huang Q., Method to destripe imaging spectroradiometer data Of SZ-3, J. Infrared Millim. Waves., 23, 6, pp. 451-454, (2004)
[10] Yang Z.D., Zhang W.J., Li J., Et al., Destriping for MODIS infrared band data via wavelet shrinkage, Journal of Remote Sensing, 8, 1, pp. 23-30, (2004)

← 1 →