Measurement and compensation method of gantry CNC machine tool based on single laser synchronisation method

被引：0

作者：

Jia M. ^{[1
]}

Gao R. ^{[1
]}

Sun L. ^{[1
]}

Guan Q. ^{[1
]}

机构：

[1] Shandong Institute of Metrology, No. 28, Qianfoshan East Road, Lixia District, Jinan City, Shandong Province

来源：

Jia, Minqiang (harborjia@163.com) | 1600年 / Inderscience Publishers, 29, route de Pre-Bois, Case Postale 856, CH-1215 Geneva 15, CH-1215, Switzerland卷 / 16期

关键词：

Compensation; Gantry CNC; Laser; Machine tool; Measurement; Nanotechnology;

D O I：

10.1504/IJNM.2020.110384

中图分类号：

学科分类号：

摘要：

The gantry CNC machine tool has unique structure and characteristic. It does not always form a symmetrical structure and symmetrical force during the machining process. The inconsistency will cause a non-synchronised error in the biaxial synchronous system. The no-synchronised error will affect the machining accuracy, cause the beam to be pulled and the gantry frame or drive element to be damaged. Therefore, the biaxial synchronisation error of the CNC machine tool is one of its most important specifications, and it should be solved firstly when compensating. This paper presents a new method called single laser synchronisation method, and puts forward the measurement method and compensation method of positioning error. This new method includes a special optical path layout, a characteristic way of measurement and compensation. This method has some advantages such as high precision, low-cost, efficiency, etc. © 2020 Inderscience Enterprises Ltd.

引用

页码：322 / 327

页数：5

共 4 条

[1]

Li X., Characteristic Analysis and Optimization of the Gantry Structure of Numerical Control Gantry Boring and Milling, (2012)

[2]

Ping X., Method of geometric error compensation for large CNC milling machine, Journal of Mechanical & Electrical Engineering, 31, 2, pp. 139-144, (2014)

[3]

Yao C., Tao L., Wanhua Z., Non-synchronous error and modeling of dual-drive system in gantry-type machine tools with travelling bridge, Journal of Mechanical Engineering, 49, 13, pp. 174-182, (2013)

[4]

Yi H., The application of laser compensation in gantry control of bridge machine, Manufacturing Technology & Machine Tool, 2014, 3, pp. 99-103, (2014)

← 1 →