Numeral Calculation of Contact Resistance of Strap Contacts of Bushing on the Side of Converter Valve

被引：0
|
作者：
Liu P. [1 ]
Ren T. [1 ]
Xie T. [1 ]
Tian H. [2 ]
Jin S. [1 ]
Wang Q. [1 ]
机构：
[1] State Key Laboratory of Electrical Insulated and Power Equipment, Xi’an Jiaotong University, Xi’an
[2] State Grid Economic and Technology Research Institute Co., Ltd., Beijing
来源：
Gaodianya Jishu/High Voltage Engineering | 2023年 / 49卷 / 03期
基金：
中国国家自然科学基金;
关键词：
contact resistance; converter valve side bushing; current-carrying connection structure; G–W model; normal pressure; strap contacts;
D O I：
10.13336/j.1003-6520.hve.20211981
中图分类号：
学科分类号：
摘要：
The current-carrying connection structure of converter valve side bushing is composed of a coaxial copper rod, an aluminum rod and strap contacts. In order to study the relationship between the contact resistance and the pressure of a single piece of strap contacts, this paper deduced the relationship between them based on the Greenwood and Williamson contact model (G–W model), introduced the force deflection correction of the strap contact finger and the surface contour correction of the contact area, and got the relationship between the contact resistance and pressure of a single contact finger under three different electrode combinations (namely, copper-copper, copper silver plated-copper silver plated, aluminum alloy silver plated-aluminum alloy silver plated). At the same time, experiments were carried out to verify the force deflection phenomenon of strap contacts, and the contact resistance of a single strap contact with pressure changes under different electrode combinations was measured. The research results show that the contact resistance decreases with the increase of pressure. When the pressure of a single strap contact is 5~9 N, the relative error between the calculated value and the experimental value after correction is within 10%, which verifies the accuracy of the correction. The research provides a reference for improving the reliability of the electrical connection of the bushing. © 2023 Science Press. All rights reserved.
引用
收藏
页码：1184 / 1193
页数：9
相关论文
共 24 条
  • [1] LIU Zhenya, Ultra-high voltage AC&DC grid, (2013)
  • [2] ZHANG Shiling, PENG Zongren, Design and analysis of insulation structure of ±800 kV valve side converter transformer bushing, High Voltage Engineering, 45, 7, pp. 2257-2266, (2019)
  • [3] ZHANG Shiling, HU Wei, PENG Zongren, Main inner insulation of 1100 kV UHVAC oil-gas bushing and structure optimization design of its fittings, High Voltage Engineering, 47, 6, pp. 2062-2072, (2021)
  • [4] WANG Qingyu, JIN Shoufeng, YUAN Shuwen, Et al., Simulation of interface charge accumulation progress and DC electric field distribution characteristics of the UHV epoxy impregnated paper-SF6 gas composite insulation wall bushing, High Voltage Engineering, 48, 10, pp. 4102-4112, (2022)
  • [5] TIAN Huidong, JIN Shoufeng, GONG Ao, Et al., Analysis on the deterioration behavior of electrical contact structure used in converter transformer rip bushings, Proceedings of the CSEE, 41, 3, pp. 1146-1155, (2021)
  • [6] ZHANG Xun, ZENG Peng, HUANG Daochun, Et al., Measurement and assessment method of contact resistance between grounding conductor and soil and its application, High Voltage Engineering, 47, 2, pp. 687-694, (2021)
  • [7] HOLM R., Electrical contacts, (1979)
  • [8] MALUCCI R D., High frequency considerations for multi-point contact interfaces, Proceedings of the Forth-Seventh IEEE Holm Conference on Electrical Contacts, pp. 175-185, (2001)
  • [9] GROBetaMANN S., Contact lifetime of connections in electrical power systems, 16th International Conference on Electrical Contacts, pp. 139-144, (1992)
  • [10] HERTZ H., On the contact of elastic solids, Journal für die reine und angewandte Mathematik, 92, pp. 156-171, (1881)
123