A novel power model with continuous parameters for wireless sensor nodes

被引：0

作者：

Liu W. ^{[1
]}

Luo R. ^{[1
]}

Yang H.-Z. ^{[1
]}

机构：

[1] Department of Electronic Engineering, Tsinghua University

来源：

Dianzi Yu Xinxi Xuebao/Journal of Electronics and Information Technology | 2010年 / 32卷 / 08期

关键词：

Power model; Power state machine; Wireless sensor network; Wireless sensor node;

D O I：

10.3724/SP.J.1146.2009.00725

中图分类号：

学科分类号：

摘要：

In order to estimate energy overhead of sensor nodes, it is necessary to model their power consumption reasonably and accurately. However, existing power models are not accurate enough. This paper proposes a novel power model based on power state machines with continuous parameters, which can be used for any type of sensor nodes. This model is able to predict power consumption of sensor nodes according to changes of supply voltage and operating frequency. By handling ATmega128 (L) microprocessor frequently used in typical sensor nodes with this model and comparing with independent measurement results, it is shown that prediction error of this model is less than 1% for active state and 9.7% for idle state. This model can be used to substitute existing models of sensor network simulators to provide more accurate prediction results of energy overhead for sensor nodes.

引用

页码：1968 / 1973

页数：5

共 15 条

[11]

Dunkels A., Osterlind F., Tsiftes N., He Z., Software-based sensor node energy estimation, The 5th Int'l Conf. Embedded Networked Sensor Systems, pp. 409-410, (2007)

[12]

Kellner S., Pink M., Meier D., Blass E.O., Towards a realistic energy model for wireless sensor networks, The 5th Annual Conf. Wireless On demand Network Systems and Services, pp. 97-100, (2008)

[13]

Schmidt D., Kramer M., Kuhn T., Wehn N., Energy modeling in sensor networks, Advances in Radio Science, 5, pp. 347-351, (2007)

[14]

MicaZ datasheet, (2009)

[15]

Kramer M., Geraldy A., Energy measurements for MicaZ node, (2006)

← 1 2 →