Erosive wear characteristics of high-alumina cenospheres filled epoxy resin composites

被引：0
作者：
Chen, Ping [1 ]
Ma, Feng [2 ]
Mei, Hua-Feng [1 ]
Zhao, Hai-Lin [1 ]
She, Jian-Min [3 ]
机构：
[1] School of Mechanical Engineering, University of Science and Technology Beijing
[2] School of Mechanical Electronic and Information Engineering, China University of Mining and Technology (Beijing)
[3] School of Materials Science and Engineering, University of Science and Technology Beijing
来源：
Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing | 2014年 / 36卷 / 02期
关键词：
Composite materials; Epoxy resin; Erosion; Impact strength; Microspheres; Wear;
D O I：
10.13374/j.issn1001-053x.2014.02.013
中图分类号：
学科分类号：
摘要：
Epoxy resin composites filled with high-alumina fly ash cenospheres were prepared in this paper. Their impact strength and erosive wear behaviors were investigated by impact test and erosive wear test. Polyamide 650 was determined as an ideal curing agent to epoxy resin according to the erosion wear mechanism, wear resistance and impact performance. Silane coupling agent improves the compatibility of the cenospheres and the epoxy resin matrix, which effectively increases the erosion resistance of the composites. When the mass fraction of the cenospheres is less than 3%, the impact strength and the erosion resistance of the composites does not change obviously. When the mass fraction of the cenospheres is 3%, the impact strength reaches maximum and the erosion resistance also increases obviously. And when the mass fraction of the cenospheres is 4%, the erosion resistance is the best. As a result, the appropriate mass fraction of high-alumina cenospheres was determined ultimately to be 3% to 4%.
引用
收藏
页码：218 / 225
页数：7
相关论文
共 20 条
  • [1] Test method for conducting erosion tests by solid particle impingement using gas jets, (2007)
  • [2] Wei Q., Cui M.L., Feng Y.L., Et al., Research of new test method for high temperature erosive wear, China Surf Eng, 23, 5, (2010)
  • [3] Sun M.L., Application Theory and Technology of Epoxy Resin, (2002)
  • [4] Boger L., Sumfleth J., Hedemann H., Et al., Improvement of fatigue life by incorporation of nanoparticles in glass fibre reinforced epoxy, Compos Part A, 41, 10, (2010)
  • [5] de Rosa I.M., Santulli C., Sarasini F., Mechanical and thermal characterization of epoxy composites reinforced with random and quasi-unidirectional untreated Phormium tenax leaf fibers, Mater Des, 31, 5, (2010)
  • [6] Lu S.R., Jing H.Y., Zhang H.L., Et al., Wear and mechanical properties of epoxy/SiO<sub>2</sub>-TiO<sub>2</sub> composites, J Mater Sci, 40, 11, (2005)
  • [7] Gao Y.M., Xing J.D., Xu X., Et al., Investigation on erosive wear of modified epoxy-based composites, J Xi'an Jiaotong Univ, 35, 3, (2001)
  • [8] Bai Z.Z., Zhao X.L., Luo X.F., Et al., Research on preparation and properties of hollow glass bead filled epoxy composites, Thermosetting Resin, 24, 2, (2009)
  • [9] Xing Z.G., Lu Z.L., Xie H., Erosion wear behaviors of SiC/epoxy resin composite, Tribology, 30, 3, (2010)
  • [10] Geng C.L., Weng D., A time-saving method to assess the efficiency of corrosion inhibitors by electro osmosis, Int J Miner Metall Mater, 18, 3, (2011)
12