Acoustic attenuation performance of elliptical multiply combined muffler based on 3D analysis method

被引：0
作者：
Chen, Changzheng [1 ]
Bai, Xiaotian [1 ]
Yu, Shenbo [1 ]
机构：
[1] School of Mechanical Engineering, Shenyang University of Technology, Shenyang
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2015年 / 51卷 / 15期
关键词：
3D analysis method; Acoustic attenuation performance; Elliptical muffler; Multiply combined muffler;
D O I：
10.3901/JME.2015.15.104
中图分类号：
学科分类号：
摘要：
Nowadays the elliptic mufflers are more widely used in the automotive industry. A 3D analysis method, aiming at solving the problem that the traditional 2D analysis method based on cylindrical coordinates cannot make an accurate simulation for the acoustic characteristics of elliptic mufflers, is reached with the importing of elliptical cylindrical coordinates, and then the theoretical derivation is made based on the 3D analysis method. An experiment with example analysis is conducted based on the theory derivation, the computation results of 2D and 3D analysis method are compared with the experimental results, and the deviation of two methods are analyzed. The comparison results show that compared with 2D analysis method, the 3D analysis method builds a more suitable model for the analysis of elliptical muffler, and is more capable of making an accurate calculation for the acoustic field inside the muffler in the whole frequency range, and the multiply combined muffler shows a better acoustic attenuation performance than the single cavity one, thus providing not only the theory basis for the selection and calculation of mufflers, but also a direction of optimization for the development of mufflers. ©, 2015, Journal of Mechanical Engineering. All right reserved.
引用
收藏
页码：104 / 110
页数：6
相关论文
共 13 条
  • [1] Vijayasree N.K., Munjal M.L., On an integrated transfer matrix method for multiply connected mufflers, Journal of Sound and Vibration, 331, pp. 1926-1938, (2012)
  • [2] Liu C., Ji Z., Xu H., Three-dimensional time-domain computation and analysis of acoustic attenuation performance of perforated tube silencers, Journal of Mechanical Engineering, 48, 10, pp. 7-13, (2012)
  • [3] Torregrosa A.J., Fajardo P., Gil A., Et al., Development of non-reflecting boundary condition for application in 3D computational fluid dynamics codes, Engineering Applications of Computational Fluid Mechanics, 6, 3, pp. 447-460, (2012)
  • [4] Mimani A., Munjal M.L., Transverse plane wave analysis of short elliptical chamber mufflers-an analytical approach, Journal of Sound and Vibration, 330, pp. 1472-1489, (2011)
  • [5] Gong J., Ma Y., Cui W., Et al., Numerical analysis on acoustic characteristics of automotive exhaust muffler by transfer matrix method, Journal of Vibration Engineering, 23, 6, pp. 636-641, (2010)
  • [6] Wang W., Li G., Ni J., Et al., Comparison of interior flow field and pressure field between two different mufflers, Transactions of CSICE, 25, 3, pp. 277-280, (2007)
  • [7] Ma J., The pipeline simulation study on active exhaust noise control of vehicle engine, (2009)
  • [8] Chiu M.C., Shape optimization of multi-chamber mufflers with plug-inlet tube on a venting process by genetic algorithms, Applied Acoustics, 71, pp. 495-505, (2010)
  • [9] Bi R., Analytical and experimental investigation on acoustic performance of hybrid muffler, (2012)
  • [10] Munjal M.L., Analysis and design of pod silencers, Journal of Sound and Vibration, 262, pp. 497-507, (2003)
12