A block-on-ring tribocorrosion setup for combined electrochemical and friction testing

被引：5

作者：

Jellesen, M.S. ^{[1
]}

Hansen, M.. ^{[1
]}

Hilbert, L.R. ^{[1
]}

Møller, P. ^{[1
]}

机构：

[1] Technical University of Denmark, Department of Manufacturing Engineering and Management, DK-2800 Kgs. Lyngby

来源：

Tribo Test | 2007年 / 13卷 / 03期

关键词：

Block-on-ring; Food industry; Metal release; Sliding wear; Tribocorrosion;

D O I：

10.1002/tt.37

中图分类号：

学科分类号：

摘要：

The combined action of corrosion and wear can cause degradation of equipment, and thereby financial losses related to the renewal or repair of damaged equipment. In the food industry, metal degradation is a major concern since metal release eventually can cause health risks for consumers. This study describes a block-on-ring testing facility used to determine sliding wear, and additionally allowing for electrochemical measurements, such as potentiodynamic polarization curves and potentiostatic monitoring of current and potential. To verify the reliability and reproducibility of this block-on-ring tribocorrosion setup, the tribological and electrochemical behaviour of stainless steel sliding against a ceramic ring in sulphuric acid has been determined. Furthermore, a case taken from the food industry has been examined. The study shows that results made on the described block-on-ring testing facility are reliable and can provide improved information about material properties. when the material is exposed to combined chemical and mechanical degradation. Copyright © 2007 John Wiley & Sons, Ltd.

引用

页码：115 / 127

页数：12

共 8 条

[1]

Jellesen M.S., Rasmussen A.A., Hilbert L.R., A review of metal release in the food industry, Materials and Corrosion, 57, 5, pp. 387-393, (2006)

[2]

Landolt D., Mischler S., Stemp M., Barril S., Third body effects and material fluxes in tribocorrosion systems involving a sliding contact, Wear, 256, pp. 517-524, (2004)

[3]

Standard Guide for Determining Synergism Between Wear and Corrosion, (1998)

[4]

Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test, (1998)

[5]

Frees N., Afprøvning af overfladebelagte materialers slidbestandighed. Tribometer. Ph.D, Thesis, (1985)

[6]

Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements, (1999)

[7]

Mischler S., Ponthiaux P., A round robin on combined electrochemical and friction tests on alumina/stainless steel contacts in sulphuric acid, Wear, 248, pp. 211-225, (2001)

[8]

Yoon E.-S., Kong H., Kwon O.-K., Oh J.-E., Evaluation of frictional characteristics for a pin-on-disk apparatus with different dynamic parameters, Wear, 203-204, pp. 341-349, (1997)

← 1 →