Effect of grain orientation on small fatigue crack growth behaviour in magnesium alloy AZ31 rolled plate

被引：0

作者：

Uematsu Y. ^{[1
]}

Sugie T. ^{[1
]}

机构：

[1] Department of Mechanical and Systems Engineering, Gifu University, Gifu-shi, Gifu, 501-1193

来源：

Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A | 2010年 / 76卷 / 763期

关键词：

EBSD; Grain orientation; Magnesium alloy; Resolved shear stress; Small fatigue crack growth;

D O I：

10.1299/kikaia.76.311

中图分类号：

学科分类号：

摘要：

Plane bending fatigue test was performed using magnesium alloy AZ31 rolled plate whose mean grain size was 106 μm. A small hole was introduced in the centre of a specimen as a crack starter notch and a fatigue crack initiated from the notch was monitored by optical and atomic force microscopes. The crystallographic orientations of grains on fatigue crack growth path were measured by an Electron Backscatter Diffraction (EBSD) method in advance, and the effect of grain orientation on small fatigue crack growth behaviour was discussed. The fatigue crack growth behaviour was strongly affected by grain orientations. Transgranular fatigue crack tended to grow due to slip deformation along the basal slip plane whose Schmid factor was relatively large. When the Schmid factors of the basal slip system were very small, the crack grew with the activation of the cylindrical slip systems. Twining deformation exerted a little influence on the crack growth behaviour. The crack growth rates were slower when the crack growth was due to slip deformation along the cylindrical slip planes.

引用

页码：311 / 316

页数：5

共 13 条

[1]

Tokaji K., Kamakura M., Hasegawa N., Tsuboi Y., Fatigue crack propagation in magnesium alloy AZ31 rolled plate, Journal of the Society of Materials Science, Japan, 52, 7, pp. 821-826, (2003)

[2]

Kamakura M., Tokaji K., Ishiizumi Y., Hasegawa N., Fatigue behaviour and fracture mechanism of an extruded AZ61 magnesium alloy, Journal of the Society of Materials Science, Japan, 53, 12, pp. 1371-1377, (2004)

[3]

Sajuri Z.B., Miyashita Y., Hosokai Y., Mutoh Y., Effects of Mn content and texture on fatigue properties of as-cast and extruded AZ61 magnesium alloys, International Journal of Mechanical Sciences, 48, 2, pp. 198-209, (2006)

[4]

Nakajima M., Tokaji K., Uematsu Y., Shimizu T., Effects of humidity and water environment on fatigue crack propagation in magnesium alloys, Zairyo/Journal of the Society of Materials Science, Japan, 56, 8, pp. 764-770, (2007)

[5]

Zeng R.C., Ke W., Han E.H., Influence of load frequency and ageing treatment of fatigue crack propagation rate of as-extruded AZ61 alloy, International Journal of Fatigue, 31, 3, pp. 463-467, (2009)

[6]

Tokaji K., Nakajima M., Uematsu Y., Fatigue crack propagation and fracture mechanisms of wrought magnesium alloys in different environments, International Journal of Fatigue, 31, 7, pp. 1137-1143, (2009)

[7]

Shiozawa K., Nagai M., Mura T., Takahashi T., Low cycle fatigue behaviour of extruded AZ61 and AZ80 magnesium alloys, Journal of the Society of Materials Science, Japan, 58, 3, pp. 235-242, (2009)

[8]

Ando S., Iwamoto N., Hori T., Tonda H., Fatigue crack propagation in magnesium crystals, Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 65, 3, pp. 187-190, (2001)

[9]

Ando S., Saruwatari K., Hon T., Tonda H., Fatigue crack propagation behavior in magnesium single crystals, Journal of the Japan Institute of Metals, 67, 5, pp. 247-251, (2003)

[10]

Sugeta A., Uematsu Y., Kuronaga E., Jona M., A study on the mechanism of small fatigue crack deflection behavior in α-Brass by means of in-situ atomic force microscopy and crystallographic orientation analysis, Journal of the Society of Materials Science, 54, 12, pp. 1268-1274, (2005)

← 1 2 →