Experimental study on estimation of mechanical properties of recycled PVC sheets

被引：0
|
作者：
Koyama A. [1 ]
Mizumoto N. [2 ]
Kikuchi M. [1 ]
机构：
[1] Dept. of Architecture, School of Science and Technology, Meiji University
[2] SEIREN Co., Ltd.
来源：
Journal of Structural and Construction Engineering | 2010年 / 75卷 / 649期
关键词：
Elongation; Recycle; Tear strength; Tensile strength; Tile carpet; Vinyl wallcovering;
D O I：
10.3130/aijs.75.505
中图分类号：
学科分类号：
摘要：
Various kinds of PVC sheets are used as a finishing material for buildings. These PVC sheets are considered as appropriate material for recycling, because PVC has thermoplastic. In this study, fundamental mechanical property tests were carried out on recycled PVC specimens. The following conclusions were obtained. 1) The influence of waste PVC compound mixing rate on the quality of recycled PVC sheets was confirmed. 2) The mechanical properties of the recycled PVC sheets were influenced from the composition ratio of polymer, plasticizer, and calcium carbonate. 3) The prediction equation of mechanical properties of recycled PVC sheets was proposed.
引用
收藏
页码：505 / 510
页数：5
相关论文
共 50 条
  • [1] MECHANICAL PROPERTIES OF BRASS SHEETS
    Plachta, A.
    Oleksiak, B.
    Siwiec, G.
    Junak, G.
    METALURGIJA, 2021, 60 (3-4): : 381 - 383
  • [2] Recycled Plaster: Physical and Mechanical Properties
    Bardella, Paulo Sergio
    Camarini, Gladis
    SUSTAINABLE DEVELOPMENT OF URBAN ENVIRONMENT AND BUILDING MATERIAL, PTS 1-4, 2012, 374-377 : 1307 - 1310
  • [3] Experimental Study on Dielectric and Mechanical Properties of PVC Cable Insulation with SiO2/CaCO3 Nanofillers
    Sugumaran, C. Pugazhendhi
    2015 IEEE CONFERENCE ON ELECTRICAL INSULATION AND DIELECTRIC PHENOMENA (CEIDP), 2015, : 503 - 506
  • [4] Experimental investigation on material flow and mechanical properties in friction stir welding of copper sheets
    Pashazadeh, Hamed
    Teimournezhad, Jamal
    Masoumi, Abolfazl
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 88 (5-8): : 1961 - 1970
  • [5] Experimental investigation on material flow and mechanical properties in friction stir welding of copper sheets
    Hamed Pashazadeh
    Jamal Teimournezhad
    Abolfazl Masoumi
    The International Journal of Advanced Manufacturing Technology, 2017, 88 : 1961 - 1970
  • [6] Experimental Study on Engineering Mechanical Properties of Beryllium
    He, Lijun
    Xu, Demei
    Zhong, Jingming
    Hu, Nan
    Wang, Zhanhong
    Sun, Benshuang
    Li, Zhong
    Zhang, Jiankang
    Li, Feng
    Kang, Huiling
    PROGRESS IN STRUCTURE, PTS 1-4, 2012, 166-169 : 2962 - +
  • [7] Experimental evaluation of mechanical and thermal properties of recycled rubber membranes reinforced with crushed polyethylene particles
    Norambuena-Contreras, J.
    Silva-Robles, E.
    Gonzalez-Torre, I.
    Saravia-Montero, Y.
    JOURNAL OF CLEANER PRODUCTION, 2017, 145 : 85 - 97
  • [8] Processability and Mechanical Properties of CB/PVC Composite
    Liu, Xiuqi
    Xing, Heqin
    Zhao, Lili
    Wang, Dan
    RESEARCH EFFORTS IN MATERIAL SCIENCE AND MECHANICS ENGINEERING, 2013, 681 : 252 - +
  • [9] Microstructure and mechanical properties of FSW joint of Mg/Al clad sheets
    Chen H.
    Wang W.
    Chen W.
    Zhang T.
    Liu R.
    Yang T.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2020, 41 (03): : 38 - 44
  • [10] Experimental study of mechanical properties of sandstone at high temperature
    Qiu-hua Rao
    Zhi Wang
    Hai-feng Xie
    Qiang Xie
    Journal of Central South University of Technology, 2007, 14 : 478 - 483
12345