Impact of passenger thermal comfort and electric devices temperature on range: A system simulation approach

被引：0

作者：

Broglia, Lionel ^{[1
]}

Autefage, Gabriel ^{[1
]}

Ponchant, Matthieu ^{[1
]}

机构：

[1] LMS Imagine, 84 quai Charles de Gaulle, Lyon

来源：

World Electric Vehicle Journal | 2012年 / 5卷 / 04期

关键词：

Battery losses; Energy management; Model based system engineering; Thermal comfort;

D O I：

10.3390/wevj5041082

中图分类号：

学科分类号：

摘要：

The range of Electric Vehicles is highly influenced by the electric power consumed by auxiliaries, a huge part of this power being used for cabin heat-up and cool-down operations in order to ensure an acceptable level of thermal comfort for the passengers. Driving range decreases with low temperatures in particular because cabin heating system requires an important amount of electric power. Range also decreases with high ambient temperatures because of the air conditioning system with electrically-driven compressor. At the same time, batteries and electric motors operates at their maximal efficiency in a certain range of temperature. The reduced EV driving range under real life operating cycles, which can be a barrier against market penetration, is an issue for further development in the future towards sophisticated cabin heating and cooling systems, as well as battery warmer. The aim of this paper is to highlight the benefits of a system simulation approach, based on LMS Imagine.Lab AMESim, in order to estimate the impact of various technologies of cabin heating and cooling on both the cabin temperature and the driving range. In this paper, a battery electric vehicle including a cabin heating with PTC device and a R134a refrigerant loop is simulated under various ambient temperatures on a given driving cycle with the same required cabin temperature target. Simulation outputs include the cabin temperature evolution, the battery state of charge and as a consequence the driving range. © 2012 WEVA.

引用

页码：1082 / 1089

页数：7

共 8 条

[1]

Kobayashi H., Yamada K., Multi-Physics System Simulation for Vehicle energy Management Optimization, (2009)

[2]

Taklanti A., Use of system simulation to evaluate the impact of additional heating strategies on vehicle fuel consumption and pollutant emissions, (2007)

[3]

Dupont H., Nuglisch Dr H.-J., Lankes M., Complete vehicle model to optimize mild hybrid and thermal, strategies and to predict CO2 emissions: development, validation and analyses

[4]

Brunelli M., Silvestri M., Sabatier N., Future trends and virtual Vehicle Energy Management of hybrid architectures, (2010)

[5]

Hafsaoui J., Scordia J., Sellier F., Liu W., Delacourt C., Aubret P., Development of an electrochemical battery model and its parameters identification tool

[6]

Hafsaoui J., Sellier F., Electrochemical model and its parameters identification tool for the follow up of batteries ageing, (2010)

[7]

El Bakkali A., A Virtual Air Conditioning System Based on the Physical Simulation of AC Components, (2004)

[8]

Kieny N., Laurain E., Mohand-Kaci I., Automotive boardnet design and analysis through multi-level multi-domain system simulation, (2010)

← 1 →