Mechanical properties of manufactured-sand concrete after high temperatures

被引：0

作者：

Chen, Zhengfa ^{[1
]}

Zhu, Hehua ^{[1
]}

Yan, Zhiguo ^{[1
]}

Peng, Gaojv ^{[1
,2
]}

机构：

[1] School of Civil Engineering, Tongji University, Shanghai

[2] School of Architecture Engineering, Shandong University of Technology, Zibo

来源：

Open Civil Engineering Journal | 2015年 / 9卷 / 01期

关键词：

Concrete; Durability; High temperature; Manufactured-sand; Strength;

D O I：

10.2174/1874149501509011007

中图分类号：

学科分类号：

摘要：

In this paper, to study mechanical properties of manufactured-sand concrete after high temperatures, experiments on the residual strength of manufactured-sand concrete were carried out under high temperatures in which raw materials performances and concrete mixture proportion were considered. The mechanism of elevated temperatures on residual strength was theoretically discussed, and the calculation formula of residual strength was given. The results indicated that with the increasing of temperature, the mass loss was small while the reducing of strength and the elastic modulus of manufactured-sand concrete were significantly. © Chen et al.; Licensee Bentham Open.

引用

页码：1007 / 1011

页数：4

共 12 条

[1]

Ergun G., Serhat B.M., Mansour M.Y., The effect of cement dosage on mechanical properties of concrete exposed to high temperatures, Fire Saf. J, 55, pp. 160-167, (2013)

[2]

Koksal F., Gencel O., Brostow W., Lobland H.E.H., Effect of high temperature on mechanical and physical properties of lightweight cement based refractory including expanded vermiculite, Mater. Res. Innovations, 16, 1, pp. 7-13, (2012)

[3]

Mydin M.A.O., Wang Y.C., Mechanical properties of foamed concrete exposed to high temperatures, Const. and Build. Mater, 1, 26, pp. 638-654, (2012)

[4]

Wang L., Pang B., Gai B., Jia B., Investigation of dynamic compression properties of reactive powder concrete after exposure in high temperature, Eng. Mechanics, 29, 9, pp. 245-251, (2012)

[5]

Bangi M.R., Horiguchi T., Pore pressure development in hybrid fibre-reinforced high strength concrete at elevated temperatures, Cem. and Concr. Res, 11, 44, pp. 1150-1156, (2011)

[6]

Li C.C., Chen L., Experimental study of mechanical properties of normal-strength concrete exposed to high temperatures at an early age, Fire Saf. J, 44, pp. 997-1002, (2009)

[7]

Yan J., Lin Z., Hu Y., The effects of high temperature on compressive strength of concrete, China Civ. Eng. J, 35, 5, pp. 17-19, (2002)

[8]

Li W., Guo Z., Experimental study on strength and deformations of concrete in high temperatures, J. Of Build. Struct, 14, 1, pp. 8-16, (1993)

[9]

Chen Z., Liu G., Qin Y., Xu J., Strength and durability of concrete with manufactured-sand in severe environment, J. Of Build. Mater, 15, 3, pp. 391-394, (2012)

[10]

Zhang Y., Han Y., Gong C., Experimental study on the mechanical performances of the concrete with manufactured sand after high temperature, Copp. Eng, 4, pp. 1-4, (2012)

← 1 2 →