Properties of HAp/β-TCP functionally graded material by spark plasma sintering

被引：0

作者：

Watanabe, Taku ^{[1
]}

Fukuhara, Tatsuya ^{[1
]}

Izui, Hiroshi ^{[1
]}

Fukase, Yasumasa ^{[1
]}

Okano, Mitiharu ^{[1
]}

机构：

[1] Graduate School of Science and Technology, Nihon University, Funabashl-shi, Chiba, 274-8501

来源：

Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A | 2009年 / 75卷 / 753期

关键词：

Bending strength; Biomaterials; Compressive strength; Functionally graded materials; Spark plasma sintering;

D O I：

10.1299/kikaia.75.612

中图分类号：

学科分类号：

摘要：

Recently, spark plasma sintering (SPS) known as a novel sintering technology has been used for fabricating ceramics, functionally graded materials (FGM) and composites. SPS can consolidate powders at lower sintering temperature and for shorter sintering duration compared to conventional sintering methods, such as hot-pressing or HIP (Hot Isostatic Pressing). Mechanical properties (three-point bending strength, Young's modulus and compressive strength) and biocompatibility of HAp/β-TCP FGM sintered by SPS were investigated. The FGMs were sintered at a temperature of 1073 K and at a pressure of 44.6 or 66.9 MPa. The FGMs compacts had higher three-point bending strength, Young's modulus and compressive strength than β-TCP. Natural bone formed on the surface of the FGM in the HAp-rich area and replacement for bone in the β-TCP-rich area. These results show that the HAp/β-TCP FGM sintered by SPS had high strength, excellent biocompatibility and controllability for graded bio-reaction.

引用

页码：612 / 618

页数：6

共 18 条

[1]

Takuya M., Kenichi T., Ryosuke K., Yoshinosuke H., Masayuki O., Junzo T., Different behavior of implanted hydroxyapatite depending on morphology, size and crystallinity, Journal of the Ceramic Society of Japan, 114, 9, pp. 760-762, (2006)

[2]

Hisashi M., Sanae A., Toru N., Kazuhiko T., Masanobu M., Kisato T., Tetsuya K., Synthesis snd characterization of fluoride apatite in a simulated body fluid, Journal of the Ceramic Society of Japan, 114, 10, pp. 838-843, (2006)

[3]

Mitsuhiko O., Natsuki K., Hideto M., Matsuhiko T., Atsushi.N., Fabrication of Porous Hydroxyapatite (HAp) Using Polyacrylonitrile (PAN) and Its Characterization, J. Soc Mat Sci., 54, 6, pp. 569-573, (2005)

[4]

Eiji F., Koji K., Hideyuki Y., Kanji T., Satoshi H., Akiyoshi O., Preparation of Aluminum Oxide-Hybridized Hydroxyapatite Powder by the Sol-Gel Method, Journal of the Ceramic Society of Japan, 113, 3, pp. 241-244, (2005)

[5]

Keiichiro T., Kiyoshi I., Tohru S., Yoshio S., Seiichiro K., Densification and superplasticity ofhydroxyapatite ceramics, Journal of the Ceramic Society of Japan, 113, 10, pp. 669-673, (2005)

[6]

Toru K., Shoji Y., Tadashi M., Masaftimi M., Takashi N., Tatsuya T., Replacement of missing auto-bone with beta-tricalcium phosphate (β-tcp): post operative evaluation for tibial condylay ftactures usig section image, Journal of West-Japanese Society of Orthopedics & Traumatology, 54, 4, pp. 751-754, (2005)

[7]

Minoru T., Seiichi K., Toshihiro O., Noriaki H., Masataka K., Surgical treatment with β-tricalcium phosphate for periarticular fracture, Journal of West-Japanese Society of Orthopedics & Traumatology, 54, 1, pp. 111-115, (2005)

[8]

Kazuhiro O., Establishment of biological and clinical evidences in periodontal tissue regeneration, Journal of the Japanese Society of Perlodontology, 47, 2, pp. 69-79, (2005)

[9]

Yukihiro M, Yoshihisa K., Ryusaku N., Koji S., Several cases of vertebroplasty using β-tc, Journal of West-Japanese Society of Orthopedics & Traumatology, 54, 1, pp. 25-27, (2005)

[10]

Yoshihiro K., Komei M., Eiichi I., Kunichika S., Results of postero-lateral fusion with local bone for lumber degenerative disease, Journal of West-Japanese Society of Orthopedics & Traumatology, 53, 1, pp. 20-22, (2004)

← 1 2 →