Comparison of discharge characteristics of atmospheric pressure plasma Jet in Ar/O2 and Ar/H2O mixtures

被引：0

作者：

Zhou, Yixiao ^{[1
,2
]}

Fang, Zhi ^{[1
]}

Shao, Tao ^{[2
,3
]}

机构：

[1] Nanjing University of Technology, Nanjing,210009, China

[2] Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing,100190, China

[3] Key Laboratory of Power Electronics and Electric Drive, Chinese Academy of Sciences, Beijing,100190, China

来源：

Diangong Jishu Xuebao/Transactions of China Electrotechnical Society | 2014年 / 29卷 / 11期

关键词：

Dielectric devices - Surface treatment - Emission spectroscopy - Plasma sources - Argon - Dielectric materials - Electric excitation - Dielectric barrier discharge - Electric corona - Molecular oxygen - Stereochemistry - Light emission - Molecular dynamics - Atmospheric pressure - Gas temperature - Plasma jets;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

In order to compare characteristics of atmospheric pressure jet(APPJ) plasmas produced in Ar/O2 mixtures and Ar/H2O mixtures with the same contents of oxygen and water vapor, the effects of Ar/O2 and Ar/H2O mixtures on discharge characteristics and evolutions of APPJ are studied by means of voltage and current waveforms, Lissajous figures, light-emission pictures, and optical emission spectra. The main discharge parameters such as discharge power, transported charges, electronic excitation temperature, molecular vibrational temperature, and molecular rotational temperature are calculated. The changing tendencies of these parameters with applied voltage are studied, and the experimental results are explained. Results show that two kinds of APPJs include three stages: corona discharge, dielectric barrier discharge and jet discharge formation. For two kinds of APPJs, the jet length increases with the increase of applied voltage. The APPJs in Ar/O2 and Ar/H2O plasmas are a typical non-thermal one with gas temperature in the range of 300~650K, in which the main species are OH, N2, Ar and a little O. In the range of 7~9.5kV, Ar/H2O plasma jet spectral intensity is higher than that of Ar/O2. Through the electronic excitation temperature and molecular rotation temperature calculation, it can be found that the electronic temperature difference under the conditions of argon oxygen and argon water is weak, but gas temperature is lower in case of argon water, which indicates that Ar/H2O plasma jet is better for surface treatment of heat sensitive material. ©, 2014, Chinese Machine Press. All right reserved.

引用

页码：229 / 238