Hard and wear resistant AISI304 stainless steel clad layer deposited on mild steel substrate by TIG cladding

被引：0
作者：
Aslam, Mohd [1 ,2 ]
Chandan, Guddakesh Kumar [1 ,3 ]
Kanchan, Brajesh Kumar [1 ]
机构：
[1] Natl Inst Technol Silchar, Dept Mech Engn, Silchar 788010, Assam, India
[2] Sharad Inst Technol Coll Engn, Dept Automat & Robot, Kolhapur 416121, Maharashtra, India
[3] North East Frontier Tech Univ, Dept Mech Engn, Aalo 791001, Arunchal Prades, India
来源：
MANUFACTURING LETTERS | 2024年 / 42卷
关键词：
AISI304 stainless steel; TIG cladding'; Microstructure; Wear resistance; Vickers hardness;
D O I：
10.1016/j.mfglet.2024.10.003
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, mild steel was cladded with preplaced AISI304 stainless steel wire using a tungsten inert gas (TIG) heat source to enhance its hardness and wear resistance. The microstructure, hardness, and tri- bological properties of clad layer were examined. Results showed the microstructure comprised phases like dendrite, cellular, and columnar dendrite, along with austenite dendrite at the interface. Microhardness ranged from 275.61HV to 334.96HV, while the substrate measured 176.94HV The clad layer exhibited a wear rate between 57 mu m and 70 mu m, with substrate at 146 mu m. XRD analysis revealed hard carbides and intermetallic compounds with Cr and Ni, enhancing hardness. 2024 Society of Manufacturing Engineers (SME), Published by Elsevier Ltd. All rights are reserved, including those for text and data mining. Al training, and similar technologies.
引用
收藏
页码：34 / 39
页数：6
相关论文
共 17 条
[1]   Development of SiC Ceramic Reinforced Composite Interlayer Cladding with AISI304 Stainless Steel Wire on Low Carbon Steel Substrate Using TIG Cladding Process [J].
Aslam, Mohd ;
Chandan, Guddakesh Kumar ;
Kanchan, Brajesh Kumar .
SILICON, 2023, 15 (18) :7733-7743
[2]   Evaluation of titanium nitride/titanium aluminum nitride thin film coating, plasma nitriding on AISI 304 stainless steel using the plasma-assisted physical vapor deposition process, and thermal stress investigated through finite-element analysis [J].
Aslam, Mohd ;
Chandan, Guddakesh Kumar ;
Kanchan, Brajesh Kumar .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2023, 237 (06) :2520-2531
[3]   Numerical and experimental investigation for the cladding of AISI 304 stainless steel on mild steel substrate using Gas Metal Arc Welding [J].
Aslam, Mohd ;
Sahoo, Chinmaya Kumar .
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2022, 37 :378-387
[4]   Finite element analysis and experimental investigation of moving heat source model for GMAW deposited mild steel weld bead [J].
Aslam, Mohd ;
Sahoo, Chinmaya Kumar .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2022, 236 (05) :2218-2228
[5]   A Study of the Processing and Characterization of Wear-Resistant NiFeCuAlCr High Entropy Alloy TIG Weld Cladding [J].
Chandel, Deepak Kumar ;
Thakur, Lalit ;
Kumar, Vinod .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (13) :6528-6540
[6]   Microstructure and wear properties of carbide reinforced high-entropy alloy coatings on EA4T steel via vibration assisted TIG-cladding using WC core spiral AlCuNiCrTi-CWW [J].
Chen, Xiaodong ;
Wang, Xiaorong ;
Liu, Xiaoqin ;
Wang, Zhaoqin ;
Meng, Qian ;
Liu, Xiaoxiao .
MATERIALS LETTERS, 2024, 375
[7]   Metal-matrix composite coatings by PTA surfacing [J].
Deuis, RL ;
Yellup, JM ;
Subramanian, C .
COMPOSITES SCIENCE AND TECHNOLOGY, 1998, 58 (02) :299-309
[8]  
Dhanda M., 2014, Procedia materials science, V6, P1226, DOI 10.1016/j.mspro.2014.07.196
[9]   Effect of TIG surface melting on structure and wear properties of air plasma-sprayed WC-Co coatings [J].
Ghadami, F. ;
Sohi, M. Heydarzadeh ;
Ghadami, S. .
SURFACE & COATINGS TECHNOLOGY, 2015, 261 :108-113
[10]   Wire and arc additive manufactured steel: Tensile and wear properties [J].
Haden, C., V ;
Zeng, G. ;
Carter, F. M., III ;
Ruhl, C. ;
Krick, B. A. ;
Harlow, D. G. .
ADDITIVE MANUFACTURING, 2017, 16 :115-123
12