Study on creep damage and crack growth for TC11 under complex stress loading

被引：1

作者：

He Y. ^{[1
]}

Ma Y. ^{[1
]}

Cao R. ^{[1
]}

机构：

[1] School of Aeronautics, Northwestern Polytechnical University, Xi'an

来源：

Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University | 2021年 / 39卷 / 01期

关键词：

Crack growth; Creep constitutive model; Creep damage; Finite element analysis; Stress triaxiality;

D O I：

10.1051/jnwpu/20213910009

中图分类号：

学科分类号：

摘要：

In order to investigate the creep damage and creep crack growth of TC11, we established the finite element model based on ductility exhaustion constitutive model. This paper uses the uniaxial creep test of TC11 at 500℃ as a reference and studies the effect of initial crack dimensions on crack growth of CT specimen and surface crack specimen. The initial crack length of CT specimen has a significant effect on creep crack growth of TC11 material. The larger the initial crack length, the higher the crack growth rate, the crack tip equivalent stress and the crack tip stress triaxiality. The initial crack length has a greater influence on creep crack growth for deep crack specimens(a0/W=0.6, a0/W=0.7) than that for shallow crack specimens(a0/W=0.3, a0/W=0.4, a0/W=0.5). When the stress intensity factor Kπ/2 at the deepest location of surface crack is the same, the crack growth length of each specimen in the depth direction at the same time is approximately twice as much as that in the length direction. With the increase of initial crack size, the crack growth rate of surface crack decreases gradually. And the effect of initial crack length on crack growth is greater than that of initial crack depth. © 2021 Journal of Northwestern Polytechnical University.

引用

页码：9 / 16

页数：7

共 15 条

[1]

TU Shandong, High temperature structural integrity, (2003)

[2]

SINGH G, SATYANARAYANA D V V, Et al., Upadrasta ramamurty enhancement in creep resistance of Ti-6Al-4V alloy due to boron addition, Materials Science & Engineering A, 597, pp. 194-203, (2014)

[3]

ADRIANO Goncalves dos Reis, DANIELI aparecida pereira reis, CARLOS de moura neto, Et al., Creep behavior study at 500℃ of laser nitrided Ti-6Al-4V alloy, Journal of materials research and Technology, 2, 1, pp. 48-51, (2013)

[4]

MA Xiaojian, Research on life predition methods for high temperature components in short life turbine engine, (2012)

[5]

XIANG Yanxun, ZHU Wujun, LIU Changjun, Et al., Creep degradation characterization of titanium alloy using nonlinear ultrasonic technique, NDT & E International, 72, pp. 41-49, (2015)

[6]

HYDE C J, HYDE T H, SUN W, Et al., Damage mechanics based predictions of creep crack growth in 316 stainless steel, Engineering Fracture Mechanics, 77, pp. 2385-2420, (2010)

[7]

ZHANG Yucai, JIANG Wenchun, TU Shantung, Et al., Creep crack growth behavior analysis of the 9Cr-1Mo steel by a modified creep-damage model, Materials Science & Engineering A, 708, pp. 68-76, (2017)

[8]

HE J Z, WANG G Z, TU S T, Et al., Characterization of 3-D creep constraint and creep crack growth rate in test specimens in ASTM-E1457 standard, Engineering Fracture Mechanics, 168, pp. 131-146, (2016)

[9]

VENUGOPAL S, SASIKALA G, KUMAR Y., Creep crack growth behavior of a P91 steel weld, Procedia Engineering, 86, pp. 662-668, (2014)

[10]

MA H S, WANG G Z, LIU S, Et al., In-plane and out-of-plane unified constraint-dependent creep crack growth rate of 316H steel, Engineering Fracture Mechanics, 155, pp. 88-101, (2016)

← 1 2 →