Electrochemical Machining of Additively Manufactured Products Made of Ti–6Al–4V Alloy

被引：0

作者：

Krasnova, E.V. ^{[1
]}

Morgunov, Yu. A. ^{[1
]}

Saushkin, B.P. ^{[1
]}

Slyusar’, I.A. ^{[1
]}

Smeyan, S.A. ^{[1
]}

机构：

[1] Moscow Polytechnic University, Moscow

来源：

Russian Engineering Research | 2024年 / 44卷 / 07期

关键词：

additive manufacturing; high-rate electrochemical dissolution; selective electron beam melting; surface roughness;

D O I：

10.3103/S1068798X2470165X

中图分类号：

学科分类号：

摘要：

Abstract: The study investigates the potential of reducing roughness parameters Ra and Rz of specimens fabricated by selective electron beam melting via the method of electrochemical dissolution in NaCl solutions at a current density of 20 А/cm2. © Allerton Press, Inc. 2024. ISSN 1068-798X, Russian Engineering Research, 2024, Vol. 44, No. 7, pp. 951–960. Allerton Press, Inc., 2024. Russian Text The Author(s), 2024, published in Vestnik Mashinostroeniya, 2024, No. 5, pp. 409–418.

引用

页码：951 / 960

页数：9

共 32 条

[1]

Liu S., Shin Y.C., Additive manufacturing of Ti6Al4V alloy: A review, Mater. Des, 164, (2019)

[2]

Lee J.-Y., Nagalingam A.P., Yeo S.H., A review on the state-of-the-art of surface finishing processes and related ISO/ASTM standards for metal additive manufactured components, Virtual Phys. Prototyping, 16, pp. 68-96, (2020)

[3]

Hashimi A.W., Mali H.S., Meena A., Surface characteristics improvement methods for metal additively manufactured parts: A review, Adv. Mater. Process. Technol, 8, pp. 4524-4563, (2022)

[4]

Kumbhar N.N., Mulay A.V., Post processing methods used to improve surface finish of products which are manufactured by additive manufacturing technologies: A review, J. Inst. Eng. India, Ser. C, 99, pp. 481-487, (2018)

[5]

Sankara Narayanan T.S.N., Park H.W., Surface finishing post-treatments for additive manufactured metallic components, Innovations in Additive Manufacturing. Springer Tracts in Additive Manufacturing, pp. 161-188, (2022)

[6]

Wang P., Sin W., Nai M., Effects of processing parameters on surface roughness of additive manufactured Ti–6Al–4V via electron beam melting, Materials, 10, (2017)

[7]

Vayssette B., Saintier N., Brugger C., Surface roughness of Ti–6Al–4V parts obtained by SLM and EBM: Effect on the high cycle fatigue life, Procedia Eng, 213, pp. 89-97, (2018)

[8]

Vayssette B., Saintier N., Brugger C., Numerical modelling of surface roughness effect on the fatigue behavior of Ti–6Al–4V obtained by additive manufacturing, Int. J. Fatigue, 123, pp. 180-195, (2019)

[9]

Klassen A., Bauereiss A., Korner C., Modelling of electron beam absorption in complex geometries, J. Phys. D: Appl. Phys, 47, (2014)

[10]

Childerhouse T., Hernandez-Nava E., M'Saoubi R., Tapoglou N., Jackson M., Surface and sub-surface integrity of Ti–6Al–4V components produced by selective electron beam melting with post-build finish machining, Procedia CIRP, 87, pp. 309-314, (2020)

← 1 2 3 4 →