ESTABLISHMENT AND CALIBRATION OF DISCRETE ELEMENT MODEL FOR COATED WHEAT SEED BASED ON STATIC AND DYNAMIC VERIFICATION TEST

被引:0
作者
Zhang, Xuejun [1 ,2 ]
Guo, Ren [1 ]
Shi, Zenglu [1 ,2 ]
Yan, Jinshan [1 ,2 ]
Bai, Shenghe [3 ]
Yang, Longfei [1 ]
Yu, Yongliang [4 ]
Wang, Duijin [4 ]
机构
[1] Xinjiang Agr Univ, Coll Mech & Elect Engn, Urumqi, Peoples R China
[2] Key Lab Intelligent Agr Equipment Xinjiang, Urumqi, Peoples R China
[3] Chinese Acad Agr Mechanizat Sci Grp Co Ltd, Natl Key Lab Agr Equipment Technol, Beijing, Peoples R China
[4] Xinjiang Tiancheng Agr Machinery Mfg Co Ltd, Tiemenguan, Peoples R China
来源
INMATEH-AGRICULTURAL ENGINEERING | 2024年 / 74卷 / 03期
关键词
coated wheat seed; repose angle; simulation; parameter calibration; seed metering;
D O I
10.35633/inmateh-74-32
中图分类号
S2 [农业工程];
学科分类号
0828 ;
摘要
This study calibrated discrete element parameters for coated wheat seeds through static and dynamic validation tests. Using physical experiments, key parameters were measured, and a discrete element model was created. Optimal parameters were identified via the Plackett-Burman test, steepest ascent experiment, and Box-Behnken design. Validation tests showed that the relative error between the simulated and actual angle of repose was 1.31%, and the relative error in seeding uniformity and seed displacement uniformity was less than 5%. These findings provide theoretical support for optimizing seed dispenser structures in precision wheat sowing.
引用
收藏
页码:370 / 379
页数:10
相关论文
共 22 条
[1]  
Boac JM, 2010, T ASABE, V53, P1201
[2]  
Chen Y.Y., 2019, SUSTAINABILITY-BASEL, V11, P5165, DOI DOI 10.3390/su11195165
[3]   DEM-CFD coupling simulation and optimization of an inside-filling air-blowing maize precision seed-metering device [J].
Han, Dandan ;
Zhang, Dongxing ;
Jing, Huirong ;
Yang, Li ;
Cui, Tao ;
Ding, Youqiang ;
Wang, Zhendong ;
Wang, Yunxia ;
Zhang, Tianliang .
COMPUTERS AND ELECTRONICS IN AGRICULTURE, 2018, 150 :426-438
[4]   Calibration and experimental verification of discrete element parameters of oil sunflower seeds [J].
Hao J. ;
Wei W. ;
Huang P. ;
Qin J. ;
Zhao J. .
1600, Chinese Society of Agricultural Engineering (37) :36-44
[5]   Parameters and contact models for DEM simulations of agricultural granular materials: A review [J].
Horabik, Jozef ;
Molenda, Marek .
BIOSYSTEMS ENGINEERING, 2016, 147 :206-225
[6]  
Hu MengJie Hu MengJie, 2018, Journal of Anhui Agricultural University, V45, P175
[7]  
Jia FuGuo Jia FuGuo, 2014, Transactions of the Chinese Society of Agricultural Engineering, V30, P254
[8]  
Lang X.T., 2016, Chinese Journal of Agricultural Resources and Regional Planning, V37, P127
[9]  
Li H.W., 2024, China Agricultural Machinery Quality and Supervision, V1, P3
[10]  
Liu FanYi Liu FanYi, 2016, Transactions of the Chinese Society of Agricultural Engineering, V32, P247