Design and Experimental Research of Wall-Climbing Robot with Reverse Thrust Adsorption

被引：0
作者：
Fan M. [1 ]
Liang P. [2 ]
Gao X. [2 ]
Zhang Q. [2 ]
Li M. [2 ]
机构：
[1] 32180 Units, Beijing
[2] School of Mechatronic Engineering, Beijing Institute of Technology, Beijing
来源：
Beijing Ligong Daxue Xuebao/Transaction of Beijing Institute of Technology | 2022年 / 42卷 / 11期
关键词：
propeller blades; reverse thrust; wall-climbing robot;
D O I：
10.15918/j.tbit1001-0645.2021.352
中图分类号：
学科分类号：
摘要：
A robot design approach was proposed that uses the reverse thrust of the dual-rotor propeller as the forward driving force and the wall adsorption force to achieve steady, rapid, and efficient robot movement on various contacting walls. The structure and the power system of the wall-climbing robot were designed. The dynamic performance of the robot was ideal when the inclination angle of the rotor was 60°, as determined by the traction force experiment of the robot in the horizontal state, according to the statics of the robot in different motion modes. The motion impact of a single-degree change in the rotor inclination angle of the robot was better than that of a doubling change in the rotor inclination angle, according to an experimental test in the actual operation process. The aerodynamic effectiveness of the propeller was considerably lowered due to the intricacy of the construction, according to experimental measurements of the robot’s adsorption force on horizontal and vertical walls. Finally, the stable adsorption ability of the robot on small slopes and vertical walls was verified by experiments. © 2022 Beijing Institute of Technology. All rights reserved.
引用
收藏
页码：1150 / 1158
页数：8
相关论文
共 26 条
  • [11] AUSTIN M P, BROWN J M, YOUNG C A, Et al., Leg design to enable dynamic running and climbing on bobcat, Proceedings of 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp. 3799-3806, (2018)
  • [12] BROWN J M, AUSTIN M P, MILLER B D, Et al., Evidence for multiple dynamic climbing gait families, Bioinspiration & Biomimetics, 14, 3, pp. 1-16, (2019)
  • [13] YANG Luhong, LIU Shunan, LIU Jialin, Et al., Aerodynamic characteristics and test optimum design of ducted coaxial rotors in forward flight, Transactions of Beijing Institute of Technology, 35, 1, pp. 48-52, (2015)
  • [14] SUKVICHAI K, MAOLANON P, SONGKRASIN K., Design of a double-propellers wall-climbing robot[C], Proceedings of 2017 IEEE International Conference on Robotics and Biomimetics (ROBIO), pp. 239-245, (2017)
  • [15] BEARDSLEY P., VertiGo —a wall-climbing robot including ground-wall transition, Disney research Zurich
  • [16] LIANG P, GAO X, ZHANG Q, Et al., Design and stability analysis of a wall-climbing robot using propulsive force of propeller, Symmetry, 13, 1, pp. 1-13, (2020)
  • [17] LIANG P, GAO X, ZHANG Q, Et al., Analysis and experimental research on motion stability of wall-climbing robot with double propellers[J], Advances in Mechanical Engineering, 13, 9, pp. 1-13, (2021)
  • [18] ALKALLA M G, FANNI M A, MOHAMED A M, Et al., Teleoperated propeller-type climbing robot for inspection of petrochemical vessels[J], Industrial Robot:An International Journal, 44, 2, pp. 166-177, (2017)
  • [19] ALKALLA M G, FANNI M A, MOHAMED A F, Et al., EJBot-II: an optimized skid-steering propeller-type climbing robot with transition mechanism[J], Advanced Robotics, 33, 20, pp. 1042-1059, (2019)
  • [20] MYEONG W, MYUNG H., Development of a wall-climbing drone capable of vertical soft landing using a tilt-rotor mechanism[J], IEEE Access, 7, 4, pp. 4868-4879, (2018)
123