Microstructures and mechanical properties of fiber laser beam welded 7A52 alloy joint

被引：0

作者：

Wang L. ^{[1
,2
]}

Xu X. ^{[1
,2
]}

Wang K. ^{[1
,2
]}

Huang Y. ^{[1
,2
]}

Peng Y. ^{[1
,2
]}

Yang D. ^{[1
,2
]}

机构：

[1] Nanjing University of Technology, Nanjing

[2] Key Laboratory of Controlled Arc Intelligent Additive Manufacturing, Nanjing

来源：

Hanjie Xuebao/Transactions of the China Welding Institution | 2020年 / 41卷 / 10期

关键词：

7A52; alloy; Laser beam welding; Mechanical properties; Microstructure;

D O I：

10.12073/j.hjxb.20200518001

中图分类号：

学科分类号：

摘要：

Fiber laser bean welding was used to fabricate 8 mm 7A52 alloy plates by butt welding. Microstructures and mechanical properties of the welded joint were investigated. Energy disperse spectroscopy (EDS) was used to measure the burning loss of alloy elements in different regions of the weld. The tensile strength and microhardness of the weld were also measured. The results showed microstructures in the upper area were smaller than that in the lower area, the content of Mg and Zn in the upper part of weld was lower than that in the lower edge. Microhardness in the upper center was higher than that in the lower center, while microhardness at the upper edge was smaller than that at the lower edge. A ductile fracture was observed as the key characteristic for the welded joint, and the tensile strength was 325 MPa, of 65.9% of base metal. The decrease of the tensile strength was caused by the burning loss of Mg, Zn, welding stresses and porosity defects. Copyright © 2020 Transactions of the China Welding Institution. All rights reserved.

引用

页码：28 / 31and37

页数：3109

共 11 条

[1]

Dursun Tolga, Soutis Costas, Recent developments in advanced aircraft aluminium alloys, Materials & Design, 56, pp. 862-871, (2014)

[2]

Hirsch Jurgen, Recent development in aluminium for automotive applications, Transactions of Nonferrous Metals Society of China, 24, 7, pp. 1995-2002, (2014)

[3]

Zou Jipeng, Li Liansheng, Gong Jianfeng, Et al., Porosity suppression in laser scanning welding of aluminum alloy thick plates with filler wires, Transactions of the China Welding Institution, 40, 10, pp. 43-47, (2019)

[4]

Zhang Lin, Study on laser MIG hybrid welding process of 7A52 aluminum alloy, (2018)

[5]

Lu Junzhi, Li Guoping, Ren Zheng, Et al., Dynamic mechanical properties of the laminated structure of 7A52/7055 aluminum alloys, Ordnance Material Science and Engineering, 42, 2, pp. 1-4, (2019)

[6]

Chang Yunfeng, Lei Zhen, Wang Xuyou, Et al., Characteristic of laser-MIG hybrid welding with filling additional cold wire for aluminum alloy, China Welding, 27, 3, pp. 35-41, (2018)

[7]

Kashaev Nikolai, Ventzke Volker, Cam Gurel, Prospects of laser beam welding and friction stir welding processes for aluminum airframe structural applications, Journal of Manufacturing Processes, 36, pp. 571-600, (2018)

[8]

Zhang lin, Feng Yuehai, Liu Siyu, Et al., Microstructures and properties of laser MIG hybrid welding of 7A52 thick plate, Hot Working Technology, 48, 3, pp. 19-23, (2019)

[9]

Song Chaoqun, Dong Shiyun, He Peng, Et al., Correlation of process parameters and porosity in laser welding of 7A52 aluminum alloy using response surface methodology, Procedia Manufacturing, 37, pp. 294-298, (2019)

[10]

Chen Chao, Chen Furong, Zhang Huijing, Effects of aging on microstructures and properties of laser welded joint of 7A52 aluminum alloys, Transactions of the China Welding Institution, 38, 11, pp. 66-70, (2017)

← 1 2 →