Experimental study on mechanical and permeability properties of sandstone with different granularities

被引：0

作者：

Zou, Hang ^{[1
,2
]}

Liu, Jian-Feng ^{[1
,2
]}

Bian, Yu ^{[1
,2
]}

Zhou, Zhi-Wei ^{[1
,2
]}

Zhuo, Yue ^{[1
,2
]}

机构：

[1] State Key Lab. of Hydraulics and Mountain River Eng., Chengdu

[2] College of Water Resource and Hydropower, Sichuan University, Chengdu

来源：

Yantu Gongcheng Xuebao/Chinese Journal of Geotechnical Engineering | 2015年 / 37卷 / 08期

关键词：

Conventional triaxial test; Granularity; Permeability; Sandstone; Triaxial compression and penetration test;

D O I：

10.11779/CJGE201508015

中图分类号：

学科分类号：

摘要：

In order to investigate and reveal the influence of granularity on mechanical behavior and permeability characteristics of sandstone, the conventional triaxial tests and triaxial compression and penetration tests are conducted on coarse sandstone, medium sandstone and fine sandstone of a project by using the MTS815 Flex Test GT rock mechanics test system. The researches show that the strength of sandstone and the parameters of shear strength, cohesion c and internal friction angle φ, increase with the decrease of granularity. The strength of sandstone has a decrease of the range between 5.15% and 24.66%. The permeability varies according to the characteristics of deformation: at the elastic stage, the holes inside the sandstone are compacted and the permeability decreases; at the elastic-plastic stage, the permeability increases slowly at first, and then moves up sharply and reaches the maximum value at the post-peak; finally, permeability decreases. The permeability of sandstone with the same granularity decreases with the increase of confining pressure, and the permeabilities of all samples under different confining pressures can be drawn as a linear function. Under the same confining pressure, there is a magnitude difference between the permeabilities of sandstone with different granularities. As for the overall performance of permeability, the permeability of the coarse sandstone is about 105 times that of the medium sandstone, and the permeability of the medium sandstone is about 10 times that of the fine sandstone. ©, 2015, Chinese Society of Civil Engineering. All right reserved.

引用

页码：1462 / 1468

页数：6

共 17 条

[1] Huang X.-W., Tang P., Miu X.-X., Et al., Testing study on seepage properties of broken sandstone, Rock and Soil Mechanics, 26, 9, pp. 1385-1388, (2005)
[2] Kang H., Experimental study on mechanical characteristics of triaxial compression of sandstone in different size, Subgrage Engineering, 6, pp. 94-96, (2013)
[3] Wang X.-J., Rong G., Zhou C.-B., Permeability experimenteral study of gritstone in deformation and failure process, Chinese Journal of Rock Mechanics and Engineering, 31, A01, pp. 2940-2947, (2012)
[4] Zhang S.-L., Shen C., Deng J.-G., Testing study on the law of permeability variation in process of rock deformation and damage, Chinese Journal of Rock Mechanics and Engineering, S1, pp. 885-888, (2000)
[5] Wang H.-L., Xu W.-Y., Yang S.-Q., Experimental investigation on permeability evolution law during course of deformation and failure of rock specimen, Rock and Soil Mechanics, 27, 10, pp. 1703-1708, (2006)
[6] Li J.-W., Xu J., Wang L., Et al., Water-rock coupling tests on mechanical properties of sandy slate rock mass, Chinese Journal of Geotechnical Engineering, 35, 3, pp. 599-604, (2013)
[7] Li S.-P., Li Y.-S., Wu Z.-Y., The permeability strain equations relating to complete stress-strain path of the rock, Chinese Journal of Geotechnical Engineering, 17, 2, pp. 13-19, (1995)
[8] Li S.P., Wu D.X., Xie W.H., Et al., Effect of confining pressure, pore pressure and specimen dimension on permeability of Yinzhuang sandstone, International Journal of Rock Mechanics and Mining Sciences, 34, 3-4, pp. 435-441, (1997)
[9] Han T.-L., Chen Y.-S., Song Y.-J., Et al., Experimental study of mechanical characteristics of sandstone under different loading paths, Chinese Journal of Rock Mechanics and Engineering, 31, A02, pp. 3959-3966, (2012)
[10] Jiang J.Q., Yang G.L., Field tests on mechanical characteristics and strength parameters of red-sandstone, Journal of Central South University of Technology, 17, 2, pp. 381-387, (2010)

← 1 2 →