Advanced Al Hydrogel Propellants: Preparation, Thermal Stability, and Self-Sustainable Combustion Characteristics

被引:1
|
作者
Hao, Jun-Lian [1 ]
Zhang, Yiran [1 ]
Zhang, Haorui [1 ]
Zhang, Xuexue [1 ]
Qiao, Wei [1 ]
Yan, Qi-Long [1 ]
机构
[1] Northwestern Polytech Univ, Natl Key Lab Solid Rocket Prop, Xian 710072, Peoples R China
关键词
POLYMER;
D O I
10.1021/acs.langmuir.4c03665
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
A new group of Al-based hydrogel propellants has been prepared and evaluated, aiming to replace currently used Al-ice propellants. The theoretical specific impulse (I sp) of these formulations is around 235 s. To enhance the ignition and combustion performances of these propellants, a 2% metastable intermixed composite Al@PVDF-CuO and minor ammonium perchlorate (AP) were introduced. The measured maximum ignition temperature of these hydrogel propellants was 2277 degrees C, higher than that of the Al-ice propellant (1700 degrees C). This increase in the ignition temperature could be attributed to the enhanced reactivity and energy release provided by the additives. Additionally, the initial mass loss temperature for this kind of hydrogel propellant, ranging from 211 to 235 degrees C, indicates higher thermal stability compared to the evaporation temperature of moisture water, indicating the strong water-locking capability of the gelling agent triaminoguanidine-glyoxal polymer (TAGP). The two main reaction steps involved in the combustion process are the oxidation of Al by H2O with H2 release, which coincides with the decomposition of TAGP at 246 degrees C, and a subsequent oxidation step with remaining H2O and TAGP residues peaking at 320 degrees C. The burn rate of these propellants is stable and controllable, ranging from 2.5 to 5.9 mm<middle dot>s-1, which is crucial for maintaining a consistent thrust during propulsion. The combustion condensed products are predominantly alpha-Al2O3, which could influence the overall combustion efficiency and thermodynamic properties of the system. The effect of AP on the Al-water reaction has been further studied using reactive force field (ReaxFF) molecular dynamic simulations. It has been shown that the presence of AP may lead to a slight decrease in H2 production, which was attributed to the increase in the H2O concentration as the major decomposition product of AP.
引用
收藏
页码:26193 / 26202
页数:10
相关论文
共 50 条
  • [31] Preparation of spherical Al-Ti alloy powder and investigation of its ignition and combustion characteristics
    Fan, Zhang
    Shi, Yan
    Jianzhong, Liu
    Qingjie, Jiao
    CHEMICAL ENGINEERING JOURNAL, 2025, 507
  • [32] Thermal decomposition and combustion characteristics of HTPB-coarse AP composite solid propellants catalyzed with Fe2O3
    Padwal, Manisha B.
    Varma, Mohan
    COMBUSTION SCIENCE AND TECHNOLOGY, 2018, 190 (09) : 1614 - 1629
  • [33] Effect of Preparation Conditions on the Stability of Pt/Al2O3 Catalysts in Methane Combustion
    Leïla Khelifi
    Abdelhamid Ghorbel
    Journal of Sol-Gel Science and Technology, 2000, 19 : 643 - 646
  • [34] Effect of preparation conditions on the stability of Pt/Al2O3 catalysts in methane combustion
    Khelifi, L
    Ghorbel, A
    JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2000, 19 (1-3) : 643 - 646
  • [35] A review on preparation, thermal transport properties, phase-change characteristics, and thermal stability of molten salts
    Ma, Shuang
    Yang, Qirong
    Li, Youping
    Yan, Chenxuan
    Wang, Xinsong
    JOURNAL OF CLEANER PRODUCTION, 2024, 444
  • [36] A comparative study of methyl ester blend ratio on thermal stability and combustion characteristics of diesel engine
    Mohan Govindasamy
    Silambarasan Rajendran
    Journal of Thermal Analysis and Calorimetry, 2022, 147 : 5049 - 5055
  • [37] A comparative study of methyl ester blend ratio on thermal stability and combustion characteristics of diesel engine
    Govindasamy, Mohan
    Rajendran, Silambarasan
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2022, 147 (08) : 5049 - 5055
  • [38] Electrical Characteristics and Thermal Stability of HfxTaySizN Metal Gate Electrode for Advanced MOS Devices
    Yang, Chang-Ta
    Chang-Liao, Kuei-Shu
    Chang, Hsin-Chun
    Fu, Chung-Hao
    Wang, Tien-Ko
    Tsai, Wen-Fa
    Ai, Chi-Fong
    Wu, Wen-Fa
    IEEE TRANSACTIONS ON ELECTRON DEVICES, 2008, 55 (11) : 3259 - 3266
  • [39] Preparation and characteristics of thermal resistance polysiloxane/Al composite coatings with low infrared emissivity
    Hu, Chen
    Xu, Guoyue
    Shen, Xingmei
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 486 (1-2) : 371 - 375
  • [40] Improvement of thermal stability of NiAl via employing Al capping layer for advanced interconnect applications
    Song, Kyeong-Youn
    Na, Seungjun
    Choi, Hoon
    Lee, Hoo-Jeong
    APPLIED PHYSICS EXPRESS, 2023, 16 (03)