Advanced Al Hydrogel Propellants: Preparation, Thermal Stability, and Self-Sustainable Combustion Characteristics

被引:1
|
作者
Hao, Jun-Lian [1 ]
Zhang, Yiran [1 ]
Zhang, Haorui [1 ]
Zhang, Xuexue [1 ]
Qiao, Wei [1 ]
Yan, Qi-Long [1 ]
机构
[1] Northwestern Polytech Univ, Natl Key Lab Solid Rocket Prop, Xian 710072, Peoples R China
关键词
POLYMER;
D O I
10.1021/acs.langmuir.4c03665
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
A new group of Al-based hydrogel propellants has been prepared and evaluated, aiming to replace currently used Al-ice propellants. The theoretical specific impulse (I sp) of these formulations is around 235 s. To enhance the ignition and combustion performances of these propellants, a 2% metastable intermixed composite Al@PVDF-CuO and minor ammonium perchlorate (AP) were introduced. The measured maximum ignition temperature of these hydrogel propellants was 2277 degrees C, higher than that of the Al-ice propellant (1700 degrees C). This increase in the ignition temperature could be attributed to the enhanced reactivity and energy release provided by the additives. Additionally, the initial mass loss temperature for this kind of hydrogel propellant, ranging from 211 to 235 degrees C, indicates higher thermal stability compared to the evaporation temperature of moisture water, indicating the strong water-locking capability of the gelling agent triaminoguanidine-glyoxal polymer (TAGP). The two main reaction steps involved in the combustion process are the oxidation of Al by H2O with H2 release, which coincides with the decomposition of TAGP at 246 degrees C, and a subsequent oxidation step with remaining H2O and TAGP residues peaking at 320 degrees C. The burn rate of these propellants is stable and controllable, ranging from 2.5 to 5.9 mm<middle dot>s-1, which is crucial for maintaining a consistent thrust during propulsion. The combustion condensed products are predominantly alpha-Al2O3, which could influence the overall combustion efficiency and thermodynamic properties of the system. The effect of AP on the Al-water reaction has been further studied using reactive force field (ReaxFF) molecular dynamic simulations. It has been shown that the presence of AP may lead to a slight decrease in H2 production, which was attributed to the increase in the H2O concentration as the major decomposition product of AP.
引用
收藏
页码:26193 / 26202
页数:10
相关论文
共 50 条
  • [21] Ce-Al Mixed Oxide with High Thermal Stability for Diesel Soot Combustion
    Sun Shumin
    Chu Wenling
    Yang Weishen
    CHINESE JOURNAL OF CATALYSIS, 2009, 30 (07) : 685 - 689
  • [22] Controlling the combustion and agglomeration characteristics of solid propellants via new micro-unit composite fuel Al@AP
    Liu, Lu
    Sang, Lipeng
    Gou, Dongliang
    Wen, Zhan
    Zhang, Gangchui
    Liu, Peijin
    He, Guoqiang
    Ao, Wen
    COMBUSTION AND FLAME, 2023, 258
  • [23] Combustion and agglomeration characteristics of aluminized propellants containing Al/CuO/PVDF metastable intermolecular composites: A highly adjustable functional catalyst
    Ao, Wen
    Wen, Zhan
    Liu, Lu
    Wang, Yang
    Zhang, Yu
    Liu, Peijin
    Qin, Zhao
    Li, Larry K. B.
    COMBUSTION AND FLAME, 2022, 241
  • [24] Modeling self-sustainable fully-covered photovoltaic thermal-compound parabolic concentrators connected to double slope solar distiller
    Gupta, Vidya Sagar
    Singh, Desh Bandhu
    Sharma, Sanjeev Kumar
    Kumar, Navneet
    Bhatti, T. S.
    Tiwari, G. N.
    DESALINATION AND WATER TREATMENT, 2020, 190 : 12 - 27
  • [25] PREPARATION AND THERMAL-STABILITY OF SUPERSATURATED NANOCRYSTALLINE AL-TI ALLOYS
    FAN, GJ
    GAO, WN
    QUAN, MX
    HU, ZQ
    MATERIALS LETTERS, 1995, 23 (1-3) : 33 - 37
  • [26] New ternary PLA/organoclay-hydrogel nanocomposites: Design, preparation and study on thermal, combustion and mechanical properties
    Shabanian, Meisam
    Hajibeygi, Mohsen
    Hedayati, Kambiz
    Khaleghi, Mahroo
    Khonakdar, Hossein Ali
    MATERIALS & DESIGN, 2016, 110 : 811 - 820
  • [27] Optimisation of the preparation of an Al-pillared clay: thermal stability and surface acidity
    Mrad, I
    Ghorbel, A
    Tichit, D
    Lambert, JF
    APPLIED CLAY SCIENCE, 1997, 12 (04) : 349 - 364
  • [28] Buckwheat self-assembling peptide-based hydrogel: Preparation, characteristics and forming mechanism
    Yu, Mengru
    Lin, Shenzhu
    Ge, Rui
    Xiong, Chunyu
    Xu, Linlin
    Zhao, Mengting
    Fan, Junfeng
    FOOD HYDROCOLLOIDS, 2022, 125
  • [29] Pt-Al2O3 cryogel with high thermal stability for catalytic combustion
    Osaki, Toshihiko
    Nagashima, Kiho
    Watari, Koji
    Tajiri, Koji
    CATALYSIS LETTERS, 2007, 119 (1-2) : 134 - 141
  • [30] Pt-Al2O3 Cryogel with High Thermal Stability for Catalytic Combustion
    Toshihiko Osaki
    Kiho Nagashima
    Koji Watari
    Koji Tajiri
    Catalysis Letters, 2007, 119 : 134 - 141