Microstructure evolution during severe plastic deformation of IF steel

被引：0

作者：

Yan, Bo ^{[1
]}

Jiao, Si-Hai ^{[2
]}

Zhang, Dian-Hua ^{[1
]}

机构：

[1] State Key Laboratory of Rolling and Automation, Northeastern University

[2] Research Institute, Baoshan Iron and Steel Co., Ltd.

来源：

Dongbei Daxue Xuebao/Journal of Northeastern University | 2014年 / 35卷 / 04期

关键词：

EBSD; IF steel; Semi-continuous equal channel angular extrusion(SC-ECAE); Severe plastic deformation; Ultrafine grained structure;

D O I：

10.3969/j.issn.1005-3026.2014.04.013

中图分类号：

学科分类号：

摘要：

Severe plastic deformation of IF steel was repeatedly carried out at room temperature by using semi-continuous equal channel angular extrusion(SC-ECAE). The microstructures evolution and the mechanisms of grain refinement during deformation were analyzed by EBSD. The results showed that the deformation primarily takes place in simple shear along the intersectional plane of the two extrusion channels, the plastic deformation is caused by shear strain, and the stress of deformation structures is reasonably uniform over the whole cross-section of the workpiece. The grain refinement is strengthened with the increase of strain. The final HAB fraction of about 90% is obtained and the HAB spacing decreases to less than 1 μm, and the overall grain size decreases to about 0.55 μm after 10 passes.

引用

页码：512 / 515

页数：3

共 10 条

[1]

Segal V.M., Materials processing by simple shear, Materials Science and Engineering: A, 192, 7, pp. 157-164, (1995)

[2]

Segal V.M., Engineering and commercialization of equal channel angular extrusion(ECAE), Materials Science and Engineering: A, 386, 11, pp. 269-276, (2004)

[3]

Segal V.M., Equal channel angular extrusion: from macro-mechanics to structure formation, Materials Science and Engineering: A, 271, 11, pp. 322-333, (1999)

[4]

Dong H., Park J.J., Si Y., Et al., Ultrafine grained low carbon steels fabricated by equal channel angular pressing: micro-structures and tensile properties, ISIJ International, 42, 12, pp. 1490-1496, (2002)

[5]

Valiev R.Z., Alexandrov I.V., Bulk Nanostructured Materials by Severe Plastic Deformation, (2006)

[6]

Yang G., Lyu H.-S., Deng B., Et al., Investigation of blooming of austenitic stainless steel ingot by ECAP, Iron and Steel, 2, pp. 77-80, (2008)

[7]

Zhorin V.A., Godovskii Y.K., Yenikolopyan N.S., A calorimetric study of changes in crystalline polymers and their blends under the simultaneous action of high pressures and shear strains, Polymer Science USSR, 24, 5, pp. 1073-1080, (1982)

[8]

Valiev R.Z., Islamgaliv R.K., Alexandrov I.V., Bulk nanostructured materials from severe plastic deformation, Progress in Materials Science, 45, 2, pp. 103-189, (2000)

[9]

Yan B., Dover S., Microstructure evolution during continuous frictional angular extrusion of interstitial-free steel, Materials Science Forum, 32, 3, pp. 584-586, (2008)

[10]

Yan B., Dover S., Microstructure and texture of interstitial-free steel fabricated by continuous frictional angular extrusion, Baosteel BAC, (2008)

← 1 →