Cathode performance in long-term operation of microbial fuel cells

被引：0
|
作者：
Pan, Bin [1 ]
Sun, Dan [1 ]
Ye, Yaoli [1 ]
Guo, Jian [1 ]
Huang, He [1 ]
Cheng, Shao'an [1 ]
机构：
[1] State Key Laboratory of Clean Energy Utilization, Zhejiang University, Hangzhou, 310027, Zhejiang
来源：
Huagong Xuebao/CIESC Journal | 2014年 / 65卷 / 09期
基金：
中国国家自然科学基金;
关键词：
Long-term operation; Microbial fuel cells; Nickel foam cathode; Salt crystallization;
D O I：
10.3969/j.issn.0438-1157.2014.09.053
中图分类号：
学科分类号：
摘要：
Cathode performance will gradually decrease during long-term operation of microbial fuel cells (MFCs), to answer why cathode performance decrease is of significant for practical application of MFCs. In this paper, nickel foam air-cathodes were used in a MFC to search the reason causing the degradation. It was found that power density of MFC with a nickel foam air-cathode was 22% less for after 4 months operation than for after 1 week operation. Electrode polarization curves measured showed that cathode performance degradation was the main reason leading to decrease in power density. At -0.2 V (vs Ag/AgCl), current density of a new cathode was 12.3 A·m-2, and decreased to 4.2 A·m-2 after 4 months operation. Cathode performance decreased with increase of operation time, which showed mainly in the high current range [>-0.05 V (vs Ag/AgCl)]. Scanning electron microscope (SEM) images indicated that there was no biofilm on cathode surface, implying that the decrease of oxygen diffusion rate through cathodes was the main reason causing the decrease of cathode performance. From energy dispersive spectrometer (EDS) measurement it was found that there was phosphate precipitation inside the cathode after 4 months operation. These results indicated that salt precipitation increased with increase of operation time could clog micro-pores of cathode and decreased oxygen diffusion rate, leading to degradation of cathode performance. © All Rights Reserved
引用
收藏
页码：3694 / 3699
页数：5
相关论文
共 15 条
  • [1] Logan B.E., Hamelers B., Rozendal R., Schroder U., Keller J., Freguia S., Aelterman P., Verstraete W., Rabaey K., Microbial fuel cells: methodology and technology , Environmental Science & Technology, 40, 17, pp. 5181-5192, (2006)
  • [2] Cusick R.D., Bryan B., Parker D.S., Et al., Performance of a pilot-scale continuous flow microbial electrolysis cell fed winery wastewater , Applied Microbiology and Biotechnology, 89, 6, pp. 2053-2063, (2011)
  • [3] Cheng S., Liu H., Logan B.E., Power densities using different cathode catalysts (Pt and CoTMPP) and polymer binders (Nafion and PTFE) in single chamber microbial fuel cells , Environmental Science & Technology, 40, 1, pp. 364-369, (2006)
  • [4] Liu H., Logan B.E., Electricity generation using an air-cathode single chamber microbial fuel cell in the presence and absence of a proton exchange membrane , Environmental Science & Technology, 38, 14, pp. 4040-4046, (2004)
  • [5] Rhoads A., Beyenal H., Lewandowski Z., Microbial fuel cell using anaerobic respiration as an anodic reaction and biomineralized manganese as a cathodic reactant , Environmental Science & Technology, 39, 12, pp. 4666-4671, (2005)
  • [6] Ter-Heijne A., Hamelers H.V., Buisman C.J., Microbial fuel cell operation with continuous biological ferrous iron oxidation of the catholyte , Environmental Science & Technology, 41, 11, pp. 4130-4134, (2007)
  • [7] Zhang F., Chen G., Hickner M.A., Et al., Novel anti-flooding poly (dimethylsiloxane) (PDMS) catalyst binder for microbial fuel cell cathodes , Journal of Power Sources, 218, pp. 100-105, (2012)
  • [8] Cheng S., Wu J., Air-cathode preparation with activated carbon as catalyst, PTFE as binder and nickel foam as current collector for microbial fuel cells , Bioelectrochemistry, 92, pp. 22-26, (2013)
  • [9] Chen G., Wei B., Logan B.E., Et al., Cationic fluorinated polymer binders for microbial fuel cell cathodes , RSC Advances, 2, 13, pp. 5856-5862, (2012)
  • [10] Fan Y., Han S.K., Liu H., Improved performance of CEA microbial fuel cells with increased reactor size , Energy & Environmental Science, 5, 8, pp. 8273-8280, (2012)
12