Two-link flexible manipulator modelling and tip trajectory tracking based on the absolute nodal coordinate method

被引：0
|
作者：
Tian, Q. [1 ]
Zhang, Y.-Q. [1 ]
Chen, L.-P. [1 ]
Yang, J. [2 ]
机构：
[1] Center for Computer-Aided Design, School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan, Hubei, China
[2] Department of Mechanical Engineering, Texas Tech University, Lubbock, TX, United States
来源：
International Journal of Robotics and Automation | 2009年 / 24卷 / 02期
关键词：
A new dynamic modelling technique for a two-link flexible manipulator based on the absolute nodal coordinate method is firstly investigated. The manipulator flexible links are discretized by ID beam elements based on the absolute nodal formulation; and the shear deformations are neglected. The equations of motion with constant system mass matrix for a two-link flexible manipulator are deducted; and the corresponding integration method with high efficiency is also introduced. The proposed modelling method is validated through the two-link flexible manipulator tip circle and square trajectory tracking control simulations by using a PID controller. The results obtained by using the model based on the absolute nodal coordinate formulation are also compared to those obtained by using the assumed mode method. The simulation results indicate that modelling and controlling the flexible manipulator based on the absolute nodal coordinate formulation is effective;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：103 / 114
相关论文
共 50 条
  • [41] PDE modeling and control of a flexible two-link manipulator
    Zhang, XP
    Xu, WW
    Nair, SS
    Chellaboina, V
    IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 2005, 13 (02) : 301 - 312
  • [42] Robust control approaches for a two-link flexible manipulator
    Adams, RJ
    Apkarian, P
    Chretien, JP
    DYNAMICS AND CONTROL OF STRUCTURES IN SPACE III, 1996, : 101 - 116
  • [43] Natural Frequency Based Optimal Design of a Two-Link Flexible Manipulator
    Lou, Yunjiang
    Gong, Wei
    Li, Zexiang
    Zhang, Jianjun
    Yang, Guilin
    ICRA: 2009 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS 1-7, 2009, : 3872 - +
  • [44] Fuzzy Learning based Adaptive Control for a Two-Link Flexible Manipulator
    Pradhan, Santanu Kumar
    Subudhi, Bidyadhar
    2013 IEEE INTERNATIONAL CONFERENCE ON CONTROL APPLICATIONS (CCA), 2013, : 282 - 287
  • [45] Modeling and control of a two-link flexible robot manipulator
    Dogan, A
    Iftar, A
    PROCEEDINGS OF THE 1998 IEEE INTERNATIONAL CONFERENCE ON CONTROL APPLICATIONS, VOLS 1 AND 2, 1996, : 761 - 765
  • [46] An energy-based nonlinear control for a two-link flexible manipulator
    Bo, X
    Fujimoto, K
    Hayakawa, Y
    TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES, 2005, 48 (160) : 92 - 101
  • [47] An energy-based nonlinear control for a two-link flexible manipulator
    Bo, Xu
    Fujimoto, Kenji
    Hayakawa, Yoshikazu
    1600, Japan Society for Aeronautical and Space Sciences (48):
  • [48] Vibration Suppression Method for a Two-Link Flexible Manipulator Based on Adaptive Iterative Learning Algorithm
    Liu, Chuanjie
    Gao, Wenbin
    Gao, Peng
    JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES, 2024, 12 (01) : 587 - 599
  • [49] Energy Minimization Approach for a Two-link Flexible Manipulator
    Faris, W. F.
    Ata, A. A.
    Sa'adeh, M. Y.
    JOURNAL OF VIBRATION AND CONTROL, 2009, 15 (04) : 497 - 526
  • [50] PDE modeling and control of a flexible two-link manipulator
    Zhang, X
    Xu, W
    Nair, SS
    Chellaboina, V
    PROCEEDINGS OF THE 2002 AMERICAN CONTROL CONFERENCE, VOLS 1-6, 2002, 1-6 : 3796 - 3801
12345